Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Anthem
Gate repair in Anthem usually takes one visit, and most fixes fall between $120 and $650 depending on what failed. We know Anthem’s gates better than a general handyman because that’s all we do: gates. Whether your opener stopped responding on Somersworth Drive or your wrought iron gate drags across the concrete off Anthem Parkway, call (775) 210-7739 and a live person answers, day or night. We’ll give you a written price before any work starts.
Why Latch and Post Gate Repair Henderson Is Anthem’s Preferred Gate Repair Company
Anthem was built fast between 1999 and 2008, and the gates went in just as quickly. The same builder-grade openers show up on home after home, and when they fail, they tend to fail the same way. We’ve learned exactly what to look for on a 2005-vintage LiftMaster or a Linear actuator that’s been baking in high-desert sun since the Bush administration. That’s why our Gate Repair team carries the control boards, gears, and hinge parts Anthem homes actually need, so the fix happens on the first visit instead of after a week of waiting on parts.
Our technicians arrive in uniform, background-checked, and wearing shoe covers before they step onto your tile. We lay drop cloths where we work and send you a photo of the clean-up before we leave. If you’ve got a sleeping toddler or a nervous dog, we can schedule around nap time and we’ll ask before we move anything in your garage. That’s the Cedarwell C.A.R.E. routine: clean up like it’s our own home, ask before we touch anything, respect your quiet hours, and explain the price before the work. Cody Beckman built this team to treat Anthem homeowners the way he’d want his own home treated.
Styles & brands we work with
Wrought Iron Gate Repair in Anthem
Wrought iron gate repair in Anthem usually falls into two categories: structural work on the gate itself, or hardware replacement on the hinges, latch, and post. Most Anthem gates from the Del Webb build-out are ornamental steel that gets called “wrought iron” because of the look, and they hold up well against sun but not against time. The weak points are almost always the hinge welds and the post footing. A sagging gate that scrapes the driveway is a hinge and post problem, not a gate panel problem. Typical repairs run $180 to $480 depending on whether we’re re-welding a hinge, resetting a post, or replacing a latch assembly.
Hinge and Post Repair
On a 2005-era Anthem home, the original hinge posts were often set shallow, and two decades of wind load and daily cycles loosen them. We reset the post in fresh concrete, re-align the gate leaf, and re-weld or replace the hinge barrels. The gate should swing level and stop dragging.
Gate Realignment and Latch Work
A gate that won’t stay closed or won’t latch cleanly is a safety issue for anyone with a pool. We true the frame, adjust the latch strike, and replace any lock that’s corroded from Anthem’s dusty, dry air. You get a written price before we start, and the 365-Day Done Right Promise means if it isn’t right, we make it right.
Metal Gate Repair in Anthem
Metal gate repair in Anthem covers the full range of steel and wrought iron work: cracked welds, rusted bottom rails, bent panels, and the post bases that hold everything up. Fine desert dust and intense UV are the two forces at work on every Anthem gate. Sun bakes the finish, dust gets into every bearing, and the temperature swings from 105°F afternoons to 40°F nights expand and contract the steel until something gives. Most metal gate repairs in Anthem run $150 to $550, with post resets on the higher end.
Weld and Rust Repair
Bottom rails rust from irrigation overspray and pooled dust, then the rust creeps into the welds. We grind out the corrosion, weld in fresh steel where needed, and treat the repair so it doesn’t rust again next season. If the damage is cosmetic, we’ll say so and give you the cheaper option.
Full Panel Straightening
Sometimes an Anthem gate gets hit by a car or pushed by a strong monsoon gust and the panel bows. We can straighten many panels in place without pulling the whole gate off its hinges, which keeps the cost down and your gate up. If replacement is the honest answer, we’ll show you why and quote it in writing.
Trusted Brands We Service in Anthem
Most Anthem gates run on LiftMaster, FAAC, BFT, or Linear operators, and our techs are factory-trained on all four. Because Anthem has such a uniform housing stock, we stock the boards, gears, and photo-eye kits those specific operators use, which means we can usually finish a repair in one trip instead of ordering parts. If your opener is a builder-grade unit from 2004 to 2006, we have seen your exact failure before and we know which part fixes it.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Anthem Homes
- Control board heat death in 2004 – 2006 homes. The original boards in many Anthem homes fail within a few years of each other because the high-desert heat degrades capacitors and solder joints. We keep replacement boards on the truck for the common LiftMaster and Linear models.
- Dust-worn plastic gears in automatic openers. Fine wind-blown dust settles inside the operator housing and acts like sandpaper on plastic drive gears. The gear strips, the motor runs but the gate doesn’t move, and the fix is a replacement gear assembly, not a whole new opener.
- Missing conduit runs from original construction. Many Anthem driveways were built without a power conduit, so openers run on solar or surface wiring that fails over time. We retrofit proper conduit and low-voltage runs so the gate works reliably instead of seasonally.
- Sagging gates from shallow post footings. Two decades of daily use and monsoon wind loosen the original posts, and the gate starts scraping. We reset the post and re-align the leaf, which usually saves the gate itself.
Pricing for Gate Repair in Anthem, NV
Here’s what Anthem homeowners typically pay:
- Hinge and post repair: $220 – $520
- Control board replacement: $180 – $420
- Plastic gear replacement on a LiftMaster or Linear: $140 – $280
- Weld and rust repair on a bottom rail: $150 – $350
- Full gate realignment with latch adjustment: $120 – $300
- Conduit retrofitting for a manual-to-automatic conversion: $400 – $900
Every job comes with a written price before we begin. We don’t give a range and then “discover” more work after we start. If we open the operator and find something unexpected, we stop, show you the problem, and give you a new written number. You approve before we proceed. Call (775) 210-7739 for a free estimate.
We Also Serve Cities Near Anthem
Our Gate Repair in Anthem team also covers Henderson, North Las Vegas, Boulder City, and Whitney. If you’re just outside Anthem, call us and we’ll tell you straight if we can get to you today. The same written-price promise and C.A.R.E. routine apply everywhere we work.
Serving Anthem, NV - Our Local Coverage Area
We’re based in the Anthem area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Anthem
The original control boards installed during Anthem’s 2004 – 2006 build-out were the same make and model across hundreds of homes, and Anthem’s heat and dust age them at nearly the same rate. When one fails on a cul-de-sac, several more are usually close behind. We stock replacement boards for those exact models so we can usually fix yours on the first visit. If your gate started acting up and your neighbor mentioned the same thing, call (775) 210-7739 for a quote.
Yes, but the honest answer depends on whether your build included a conduit run. Many Anthem homes did not, which means the original owner either stayed manual or used a solar opener. We can retrofit conduit and low-voltage wiring without tearing up your driveway, and most conversions run $400 to $900 for the power and conduit work on top of the opener itself. We’ll write you a full price before any digging starts.
Fine desert dust gets into the operator housing and grinds against the plastic drive gears every time the gate cycles. In Anthem’s dry, windy conditions, that dust is finer and more abrasive than in most climates, which strips gears faster. The fix is a replacement gear assembly, and it’s usually under $280. Call (775) 210-7739 and we’ll verify the model and give you a written price.
The sag is almost never the panel itself. It’s the post footing loosening over two decades of wind and ground movement. We reset the post in new concrete, re-align the gate leaf, and replace the worn hinge barrels. Most sag repairs run $220 to $520, much less than a new gate. If the panel is actually bent or rusted through, we’ll show you before recommending replacement.
Yes. Automatic gate operators in Nevada are required to have safety devices that prevent the gate from closing on a person, a pet, or a car. UL 325 compliance means photo-eyes or edge sensors, and we test both on every automatic gate repair in Anthem. If yours are missing or bypassed, we’ll fix that as part of the repair because it’s a legal and safety requirement, not an upsell.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Henderson, serving Anthem since 2009.