Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Sunrise Manor
Gate repair in Sunrise Manor usually comes down to one of three things: a hinge post that’s gone loose, an opener board that got hit by a monsoon surge, or a track so full of desert sand the gate won’t close. Most repairs run between $180 and $650, and we’ll give you the written price before any work starts. Our Gate Repair team works throughout Sunrise Manor, from the Desert Inn Road corridor up to the neighborhoods near Hollywood Boulevard and out toward the Nellis foothills. Call (775) 210-7739 and a live person picks up, day or night.
Why Latch and Post Gate Repair Henderson Is Sunrise Manor’s Preferred Gate Repair Company
Latch & Post has been part of the Cedarwell family since 2009, and our technicians are background-checked, uniformed, and trained specifically on the brands families actually own here: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Cody Beckman leads the team, and he’s built the service around one idea: a gate repair should leave your house looking like nobody was there except that the gate works again.
We lay drop cloths on the floor and put on shoe covers before we step inside, even when the work is mostly outside. We choose pet-safe lubricants where there’s a choice, and we can schedule around nap time if quiet matters. When the job’s done, the technician takes a photo of the clean-up before leaving. It’s not an upsell; it’s how every visit works.
Sunrise Manor homeowners call us because the gate on a stucco-wall property east of Las Vegas sees conditions a gate in Summerlin or Henderson rarely does: flash-flood runoff pooling at the post footing, monsoon lightning hitting the opener board, sand working into the rack and pinion. We know what that does to a Viking swing gate or a Ghost Controls slider, and we stock the parts to fix it without a second trip.
Styles & brands we work with





Metal Gate Repair in Sunrise Manor
Metal Gate Repair in Sunrise Manor typically means steel or wrought-iron gates that have rusted at the hinge welds, sagged until they drag on the concrete apron, or seized up where the post meets the footing after years of monsoon runoff. A standard metal gate repair here runs $220 – $520 depending on whether we’re replacing hinges, resetting a post, or welding a cracked joint. Most jobs are done in one visit.
Hinge and post resetting
When a metal gate sags, the hinge post is almost always the cause, not the gate leaf itself. In Sunrise Manor, runoff from summer downpours works its way into the post footing and slowly rusts the base. We dig out the old footing, set the post deeper, and re-hang the gate so it swings level on the hinges. The written price covers the concrete work and the re-hang.
Weld and rust repair
Rusted-through gate frames and broken picket welds are common on older iron gates across Sunrise Manor. We grind back the rust, weld the joint, and prime and paint the repair so it doesn’t rust through again at the same spot. Expect $180 – $380 for a typical weld-and-paint repair on a residential gate.
Wood Gate Repair in Sunrise Manor
Wood Gate Repair in Sunrise Manor usually involves a fence gate on a larger lot where the frame has racked out of square, the latch no longer catches, or the hinge screws have stripped out of weathered cedar or pine. A standard wood gate realignment or latch replacement runs $160 – $320, and we’ll quote the exact number in writing before touching anything.
Realignment and latch replacement
Desert sun dries out wood gates fast, and a gate that was square in April can bind by August. We re-square the frame, add a diagonal brace where it’s missing, and replace the latch so it actually holds. On homes with RV access gates off the alley, we see this pattern constantly; the secondary gate gets ignored until it won’t close at all.
Post replacement in concrete
When a wood gate post rots at ground level, the gate drops and the latch stops lining up. We dig out the old post, set a pressure-treated replacement in concrete, and re-hang the gate so it closes like it should. $220 – $420 covers most residential wood post replacements in Sunrise Manor neighborhoods.
Trusted Brands We Service in Sunrise Manor
Our technicians are factory-trained on the gate opener brands families in Sunrise Manor actually have bolted to their posts: LiftMaster and DoorKing on the older installs, plus BFT, Linear, Viking, Ghost Controls, Mighty Mule, FAAC, and Elite on newer automation. We carry common boards, safety sensors, and remote receivers in the truck, which means less waiting when a monsoon surge takes out a BFT board on a Monday morning. If your opener is dead and you can’t identify the brand, call us; we’ll figure it out on site.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Sunrise Manor Homes
- Monsoon surge damage: Power surges from cloud-to-ground lightning routinely fry gate operator circuit boards, especially on older LiftMaster and DoorKing units. The opener goes dead on the hottest morning of the week, and the gate has to be manually released just to get a car out.
- Rusted hinge posts from runoff: Flash-flood runoff pools at the base of gate posts and eats through the steel underground. The gate still looks straight, but it sags hard as soon as the hinge post lets go.
- Sand-clogged slide tracks: Blowing desert dust works into slide gate tracks and loop detectors, causing the gate to reverse mid-cycle or refuse to close at all. A track cleaning and sensor realignment fixes most cases same day.
- Bypassed safety sensors: We see a lot of residents overriding safety photocells to speed up entry, especially on rentals with a transient tenant base. It leads to repeated service calls and, worse, a gate that doesn’t stop when it should. We restore the sensors and test the reversal pressure per the manufacturer’s spec.
In the Desert Inn Road corridor near Hollywood Boulevard, we recently repaired a Viking swing gate whose hinge post had rotted loose from its post footing after years of flash-flood runoff. The crew reset the post in a deeper concrete footing, added a new rack and pinion set, and recalibrated the safety photocell the owner had bypassed, restoring reliable, UL 325 compliant operation before the next monsoon front.
Pricing for Gate Repair in Sunrise Manor, NV
Most gate repairs in Sunrise Manor land between $180 and $650. A simple latch replacement or gate realignment runs $160 – $320. Hinge and post work, including digging and concrete, runs $220 – $520. Opener board replacements after a monsoon surge run $280 – $620 depending on brand and model. Every single job gets a written price before we start. No surprises on the invoice, no pressure to accept. Call (775) 210-7739 for a free estimate on your specific gate.
We Also Serve Cities Near Sunrise Manor
Our Gate Repair in Sunrise Manor service also reaches neighboring communities including Henderson, North Las Vegas, Boulder City, and Whitney. If you’re just outside Sunrise Manor, call anyway; we’ll tell you straight if we cover your street.
Serving Sunrise Manor, NV - Our Local Coverage Area
We’re based in the Sunrise Manor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Sunrise Manor
A nearby lightning strike sends a power surge through the line, and the gate opener’s circuit board takes the hit. Older LiftMaster and DoorKing units are especially vulnerable. We replace the board, verify the transformer, and often add a surge suppressor so the next monsoon doesn’t kill the new one. Call (775) 210-7739 for a board replacement quote; most are $280 – $620 installed.
Usually yes. The problem is typically the hinge post or the hinge welds, not the gate leaf itself. We reset the post in fresh concrete, replace the hinges, and re-hang the same panel. A sagging gate repair in Sunrise Manor runs $220 – $520, and the written estimate tells you exactly what’s being done before we start.
An automatic gate here should have functioning photocells or contact edges, and the opener should reverse when it meets resistance. If a previous owner bypassed the sensors, the gate isn’t compliant. We test reversal pressure, photocell alignment, and edge sensors on every opener repair, and we’ll show you the results before we leave.
Solar gate openers work well here given the year-round sun, and we install them on single-swing and dual-swing gates where trenching a power line isn’t practical. You’ll still want a battery backup for monsoon weeks of cloud cover. We’re trained on solar-capable models from Ghost Controls, Mighty Mule, and FAAC, and we’ll spec the right panel for your gate’s size and weight.
A full gate installation includes the post footings in concrete, the gate panels hung and leveled, the opener with safety sensors, the power run or solar set-up, and a full reversal and edge test before we hand it over. Installations are measured and scheduled, not same-day. You get a free measure and a written price first. Call (775) 210-7739 to book a site visit.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Henderson, part of the Cedarwell family since 2009.