Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Henderson?
Gate Repair in Henderson typically costs between $180 and $650 for most common fixes, with the majority of homeowners paying around $330 for a standard latch, hinge, or sensor repair in 2026. Full gate replacement runs higher, usually $1,200 to $4,800 depending on material and length. The exact price depends on what’s broken, the gate’s size and material, and whether the opener or post is involved.
We give you a written price before any work starts, so you’ll never get a surprise number after we’ve already touched the gate. That’s how we’ve done it with Gate Repair Near Me in Henderson, NV since 2009, and it’s not changing.
Gate Repair Cost Breakdown (2026)
Here’s what we see across Henderson neighborhoods, from Anthem and MacDonald Ranch to Green Valley and Lake Las Vegas. These are the numbers we actually quote, not national averages that don’t reflect the Las Vegas Valley market.
| Repair Type | Typical Cost Range | What’s Involved |
|---|---|---|
| Gate latch or lock replacement | $145 – $285 | New latch hardware, alignment, strike plate adjustment |
| Hinge repair or replacement | $195 – $375 | Welded or bolted hinge swap, gate re-leveling |
| Sagging gate correction | $160 – $310 | Post inspection, hinge realignment, tension adjustment |
| Gate opener motor repair | $225 – $480 | Diagnosis, capacitor or gear replacement, limit switch adjustment |
| Sensor or keypad fix | $130 – $260 | Photocell replacement, wiring check, keypad reprogramming |
| Gate post repair or reset | $350 – $850 | Post excavation, concrete reset, gate re-hanging |
| Track and roller replacement (sliding gates) | $240 – $520 | New rollers, track alignment, debris removal |
| Weld repair (iron or steel gates) | $180 – $430 | On-site welding, smoothing, prime and paint touch-up |
| Full gate replacement | $1,200 – $4,800 | Old gate removal, new gate fabrication or install, opener reconnection |
These ranges reflect Henderson pricing as of 2026. What moves a job from the low end to the high end usually comes down to gate size, material, access, and whether the post itself is compromised. A 4-foot pedestrian gate with a simple latch is a quick morning job. A 16-foot steel driveway gate with a failed post and a LiftMaster opener that won’t communicate means more labor, more parts, and sometimes a concrete pour.
Every quote includes the written price up front. You see the number, you approve it, we start. No hourly billing that runs away while you watch the clock.
What Affects Gate Repair Pricing in Henderson
Henderson has a particular set of conditions that influence gate repair costs. Here are the factors that actually move the number:
- Gate material. Wrought iron and steel gates often need welding, which costs more in labor than swapping hardware on a vinyl or wood gate. But vinyl and wood have their own issues here: Henderson’s dry heat causes vinyl to get brittle and wood to split, which can mean replacing sections rather than tightening screws.
- Gate size and weight. A heavy double driveway gate puts more load on hinges, posts, and the opener motor. Repairs on larger gates take longer and sometimes need two technicians to safely remove and reset the leaf.
- Post condition. This is the big one. If the post is leaning, cracked, or rusted at the base, a simple hinge repair won’t hold. Resetting a post means digging, concrete, and letting it cure before the gate gets re-hung. That’s where the $350 to $850 range comes from.
- Opener type and brand. LiftMaster, FAAC, BFT, and DoorKing are common in Henderson HOAs and gated communities. Parts availability is usually good, but diagnostic time varies. Older Viking or Linear units sometimes need retrofit kits when original boards are discontinued, which adds to the parts cost.
- Henderson’s caliche soil. The hard, cement-like layer under much of Henderson’s topsoil makes digging out a failed post slower than in soft soil. It also means posts set years ago may have been placed in soil that drains poorly during rare heavy rains, contributing to rust at the base.
- Desert sun and dust. UV exposure degrades plastic housings, keypads, and wiring insulation. Fine desert dust works its way into opener gears and track rollers. We often find that what looks like a motor failure is actually a dust-packed gear assembly. The fix is cheaper, but diagnosis takes a trained eye.
Common Henderson Gate Repair Scenarios and Real Pricing
Let’s get specific. These are situations we see week in and week out across Henderson, with the numbers that usually apply.
“My gate won’t close all the way.”
In Anthem and Seven Hills, this is usually a photocell alignment issue or a limit switch that’s drifted out of adjustment. If the sensors are fine, the problem is often a sagging gate that’s binding against the latch post. Fixing the sag typically runs $160 to $310. Replacing a failed sensor is $130 to $260. We’ll tell you which one it is before we do the work.
“The keypad stopped accepting my code.”
Solar heat in Henderson is rough on keypad membranes. The keys crack, moisture gets in, and the contacts corrode. A new keypad installed and programmed usually costs $145 to $230 depending on the opener brand. If you have a LiftMaster or DoorKing system, parts are readily available. If you have an older Linear keypad, we may recommend a compatible retrofit rather than hunting for discontinued parts.
“The gate is sagging and dragging on the driveway.”
This is almost always a Hinge & Post Repair problem. If the hinges are worn, replacing them and re-leveling the gate runs $195 to $375. If the post itself has shifted, the fix costs more, $350 to $850, because we’re setting a new post in concrete. In Green Valley and Whitney Ranch, we see a lot of posts that were set too shallow when the homes were built, and the reset is the honest fix.
“My electric gate makes a grinding noise.”
That’s usually the gear assembly inside the opener, especially on FAAC and BFT hydraulic units that have been running in dusty conditions. Repairs run $225 to $480. Sometimes it’s a worn belt or chain that needs only tensioning and lubrication, which lands on the lower end. We use pet-safe lubricants where there’s a choice, because every gate comes down to two parts, the latch that holds it and the post that carries it, and families don’t need a chemical smell lingering near where the kids play.
How Much Does Electric Gate Repair Cost in Henderson?
Electric gate repair in Henderson averages $250 to $500 for most opener, board, and sensor issues. Here’s what that includes by component:
- Control board replacement: $280 – $550. Boards fail from power surges and heat. Henderson’s monsoon-season lightning and rolling summer brownouts are hard on electronics.
- Capacitor replacement: $160 – $290. A common fix when the motor hums but won’t start.
- Photocell sensor replacement: $130 – $260. Sensors get knocked out of alignment or fail from UV exposure.
- Remote control programming: $60 – $150. Often done alongside other repairs at no extra charge when we’re already on site.
- Full opener replacement: $800 – $1,900 installed. This is a new motor unit matched to your gate’s weight and duty cycle.
We’re factory-trained on the brands most Henderson homes actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters because a BFT hydraulic system is nothing like a Mighty Mule chain-drive opener, and the right fix on the first visit is what keeps your total cost down.
How to Save on Gate Repair in Henderson
Repair costs stay lower when you catch problems early and avoid unnecessary replacements. Here’s what actually works:
- Act on noise and slowness immediately. A grinding opener or a gate that moves slower than it used to is telling you something. Waiting turns a $200 gear adjustment into a $500 motor replacement. If your gate sounds different, call before the heat of July makes the problem worse.
- Keep hinges lubricated with the right product. In Henderson’s dry climate, metal-on-metal wear accelerates. A twice-yearly shot of a dry lubricant on hinges and rollers adds years to the hardware. Skip WD-40; it’s a solvent that washes away grease. We use pet-safe lubricants when we service your gate, because the family dog will sniff anything.
- Inspect posts after heavy rain. Henderson doesn’t get much rain, but when it comes, it comes hard. Check your gate posts for new cracks or shifting after a downpour. Early post stabilization is cheaper than a full reset.
- Ask for a written price first. We include a written quote before any work begins, every single visit. When you know the number up front, you can make an honest decision about repair versus replace without pressure.
- Get a free estimate. Our estimates are free. Call (775) 210-7739 and we’ll come out, diagnose the problem, and hand you a written number. You don’t have to accept anything.
Repair vs. Replace: What Makes More Sense Financially in Henderson?
Here’s the rule of thumb we share with homeowners: if the repair cost is under half the price of a comparable new gate, repair wins. If you’re above that threshold and the gate is more than 15 years old, replacement starts to make more sense.
For a standard 8-foot iron pedestrian gate, replacement runs $1,200 to $2,000. A $400 repair is reasonable. A $900 repair on that same gate is questionable. For a 16-foot steel driveway gate worth $3,500 to $4,800 to replace, even an $800 post reset is a smart repair.
We walk through the math with you on every call. If repair doesn’t pencil out, we’ll say so. The 365-Day Done Right Promise means if the repair or installation isn’t right, we make it right, no argument, no fine print. That promise only makes sense if we recommend the fix that actually holds up in Henderson conditions.
Henderson HOA Considerations for Gate Repair
Henderson has a high concentration of HOA communities, and many regulate gate appearance, material, and even opener types. Communities like Anthem, Inspirada, and Green Valley Ranch often have preferred gate styles and may require approval before any visible change. A repair that matches the existing hardware is almost always fine. A full replacement may need an architectural review.
Our technicians work in these communities regularly. We know how to match hardware discreetly and when to ask if you’ve checked your CC&Rs. We won’t install something that’s going to get you a letter from the HOA a month later. We lay drop cloths on the floor and put on shoe covers before we step inside, and we treat your HOA’s rules as part of the job, not an afterthought.
Step-by-Step: How Gate Repair Pricing Works With Us
Here’s exactly what happens when you call us for a gate repair in Henderson:
- Call (775) 210-7739. A live person answers, 24 hours a day, 7 days a week. No voicemail. No callback queue. Tell us what’s happening with your gate.
- We schedule a visit. We work around your schedule. If your kids are napping or your dog gets anxious around strangers, we can note that. We bring quiet tools when kids are asleep.
- We diagnose on site. A background-checked, uniformed technician arrives, puts on shoe covers, and inspects the gate, opener, hinges, and posts. We ask before we move or touch anything.
- You get a written price. Before any work starts, you see the exact number in writing. It includes parts, labor, and cleanup. No hourly vagueness, no surprise fees.
- We do the work. Factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, the technician completes the repair and tests the gate through multiple open and close cycles.
- We clean up and show you. Your gate area is left cleaner than we found it. We take a photo of the clean-up before we leave, so you can see it. The 365-Day Done Right Promise covers the work. If anything isn’t right, call us and we’ll return.
What Brands Do We Service in Henderson?
Henderson’s gate openers skew toward LiftMaster, FAAC, BFT, and DoorKing in HOA communities, with Ghost Controls and Mighty Mule common on residential driveway gates in areas like MacDonald Ranch and Roma Hills. Older homes in Green Valley may still have Linear or Viking openers. We service and repair all of these brands, and our technicians are factory-trained on each of them.
The brand matters because a generic handyman with a multimeter and a catalog is not the same as a technician who has rebuilt a FAAC hydraulic pump in the field. When your gate is 400 pounds and your toddler is playing in the yard, you want the fix that’s sure the first time.
Warranty and Guarantee on Gate Repairs
Every repair and installation from Latch and Post Gate Repair Henderson carries the 365-Day Done Right Promise. If the repair isn’t done right within a full year, we make it right. That’s the whole promise. It’s not pro-rated. There’s no fine print that excludes motor parts or sensors. It’s one year of coverage on everything we touch.
For opener repairs, manufacturer warranties on replaced parts also apply. LiftMaster, FAAC, and BFT all carry their own part warranties, and we register those for you so you’re covered on both fronts.
FAQs – Gate Repair Cost in Henderson
How much does gate repair cost in Henderson, NV?
Most gate repairs in Henderson run between $180 and $650, with a typical repair landing around $330. Small fixes like keypad replacement fall on the lower end at $145 to $230, while post resets and opener motor replacements can reach $500 to $850. Call (775) 210-7739 for a free estimate and a written price before any work begins.
Is it cheaper to repair or replace a gate?
Repair is cheaper when the repair cost is under 50% of the replacement price. A $400 hinge and latch repair on a gate that would cost $2,000 to replace is an obvious repair. A $900 repair on that same gate makes replacement worth considering. We’ll give you honest math on your specific gate.
How much does it cost to fix a sagging gate in Henderson?
Fixing a sagging gate typically costs $160 to $375 if the hinges are the culprit. If the post itself has shifted, expect $350 to $850 for a post reset in concrete. Henderson’s caliche soil makes post digging harder than in most regions, which is reflected in that range.
How much does an electric gate opener repair cost?
Electric gate opener repairs in Henderson average $250 to $500, with control board replacements at $280 to $550 and simple sensor fixes at $130 to $260. Full opener replacement runs $800 to $1,900 installed. Call (775) 210-7739 for an exact quote, estimates are free.
Can you repair my gate the same day?
Yes. Many common repairs, including Lock Repair, hinge swaps, and sensor realignment, are completed in a single visit. We carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule on our trucks. A live person answers your call 24/7 at (775) 210-7739.
Why Henderson Homeowners Call Latch and Post
We’ve been part of the Cedarwell family of independently owned and operated gate specialists since 2009. Gate repair, gate installation, and electric gate repair are all we do. That focus is why every gate comes down to two parts, the latch that holds it and the post that carries it. That’s the job we focus on.
Led by Cody Beckman, our team works to the Cedarwell C.A.R.E. values on every Henderson visit:
- Clean up like it’s our own home. Shoe covers and drop cloths on every visit. A photo of the clean-up before we leave.
- Ask before we move or touch anything. Your property, your rules.
- Respect the family’s time and quiet hours. Quiet tools when kids are asleep, pet-safe lubricants where there’s a choice, and scheduling that works around nap time.
- Explain the price before the work. Written quote, every visit, no pressure.
If your gate is acting up, start with a call. You’ll get a live person, a straight answer, and a free estimate. If you’d like to learn more about what we do, visit our home page or read about Gate Repair in Henderson for more detail on our full service area and process.
Call (775) 210-7739 today. Your floors stay clean, your gate works right, and you know exactly what it costs before we start.
Pricing reflects the Henderson market as of 2026. Latch and Post Gate Repair Henderson offers free estimates – call (775) 210-7739.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Henderson, serving Henderson since 2009.
What Our Customers Say
"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Electric gate was sticking. He oiled and adjusted the track, wiped everything down after, and left no grease anywhere. Quiet, kind, and quick."
- Carlene Fuchs