Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Access Control Installation: The Henderson Owner’s Guide
If you own a Ghost Controls gate opener, the access control installation is the collection of parts that accepts inputs from keypads, remotes, vehicle sensors, and intercoms, then tells the arm to swing or slide. When it fails, your gate ignores commands, runs intermittently, or accepts a code from a decade-old neighbor’s remote. We stock Ghost Controls-compatible access control parts on our trucks in Henderson, and a typical access control board or receiver replacement runs $180 to $520 installed, with most jobs finished in one visit and a written price in your hand before any work starts.
Most Henderson owners discover the problem the day the gate stops answering a keypad that worked the evening before. The operator still has power and the arm moves when you use the manual release, but the signal path from button to brain is broken. We see this exact failure pattern out in Inspirada, Anthem, Green Valley Ranch, and up along Horizon Ridge, where desert heat plus low-voltage wiring degrade connections faster than owners expect.
Which Ghost Controls Models This Applies To
Ghost Controls builds access control components into three series we work on regularly: the AXDP (dual gate) kits, the TSS1/TDS1 heavy-duty slide and swing operators, and the older GTO/Pro line that Ghost Controls absorbed. Your access control installation typically includes a control board inside the operator housing, a receiver module, and the external input terminal strip where keypads and sensors land. The compatibility gotcha we see often in Henderson: a Ghost Controls board stamped with AXDP firmware will not cleanly accept older Mighty Mule accessory remotes, even though both brands once shared GTO lineage. You need a Ghost Controls receiver on the correct frequency, usually 318 MHz or 433 MHz depending on the kit’s manufacture date.
Identify your part by opening the operator cover and photographing the white sticker on the control board. It lists the model, firmware version, and date code. Do not rely on the keypad’s brand name alone; we have replaced access boards where the keypad said one thing and the board said another. For OEM versus aftermarket: we install OEM Ghost Controls boards on units still under the factory’s shorter warranty window, and proven aftermarket receiver modules on units where the board is out of production and an OEM replacement costs more than the operator itself. We will tell you which path makes sense for your gate before you spend a dollar.
Styles & brands we work with
Signs Your Ghost Controls Access Control Installation Is Failing
- Keypad accepts a code but the gate does not move. The keypad is talking; the access control board is not listening. This usually points to a failed relay on the board or a blown input terminal from a power surge, both common after Henderson monsoon-season lightning.
- Gate opens on its own, or won’t close at the same exit loop position. A wandering or shorted loop detector circuit on the access board sends false vehicle-presence signals. In Sun City Anthem and other communities with metal gates set near power lines, interference makes this worse.
- Remote works from 10 feet but not from the street. The receiver’s antenna circuit or the module itself is degrading. Ghost Controls receivers lose range gradually, and most owners only notice when they are at the mailbox pushing the button twice.
- Intermittent power cycling on the operator, or random beeping from the board. A failing power-supply section on the access control board causes brownouts. We have traced several Henderson calls to a swollen capacitor on the board, which is straightforward to replace once we confirm the part number.
- One brand of accessories works while another stopped. If the wired keypad still works but the wireless receiver went silent, the receiver module died independently of the board. We can swap just the receiver on most Ghost Controls units without replacing the entire access control installation.
Replacement Cost & What’s Included
In Henderson, a full Ghost Controls access control replacement, meaning control board, receiver module, and input terminal wiring, typically lands between $320 and $520 installed. A receiver-only replacement runs $180 to $280. A loop detector replacement on the access control input sits between $220 and $360. Every quote we give specifies the part, the labor, and the exact total, in writing, before we reach for a screwdriver. You will never see a surprise line item after the gate is back in service.
The price varies by your operator’s series and by how much of the original wiring we can reuse. Some Henderson homes built in the early 2000s have access control wire that is brittle from heat and needs pulling back to the keypad, which adds labor but prevents a repeat failure six months later. All access control work we install carries the 365-Day Done Right Promise: if it is not right, Latch & Post makes it right, no argument and no fine print.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Working on a Ghost Controls access control installation means opening the operator and touching low-voltage control wiring. It will not throw you off the gate like a spring replacement will, but it can still hurt you if the operator is running on 120V AC and the wiring is not dead. A homeowner can safely check three things: that the keypad battery is fresh, that the operator has power from its breaker, and that no wire nut has backed off inside the keypad housing. Past that point, you are probing a live board, and that is where we recommend a trained technician.
The DIY failure we see most often is a Henderson owner ordering a board by the operator’s name instead of the sticker’s model number, then paying a restocking fee and still having a dead gate. We keep common Ghost Controls access boards and receiver modules stocked locally, and we will match the part to your unit before any money changes hands. Call (775) 210-7739 and a live person answers, day or night, no voicemail queue.
FAQs
Most Ghost Controls access control boards and receivers last 7 to 10 years in Henderson, though boards mounted in direct sun or in metal housings with poor airflow can fail in 5. We see the longest life from units protected by a shade cover and cleaned annually of dust. Call (775) 210-7739 if your board is past year seven and acting up; a receiver swap is cheaper than waiting for a full board failure.
Sometimes, yes. A visible swollen capacitor, a corrosion-burned terminal block, or a dead relay can be repaired on the board itself if the part is accessible and the board is still supported. We will attempt the repair first when it makes financial sense, and we will show you the written price comparison before any work begins.
A receiver-only replacement takes under an hour in most Henderson homes. A full board and receiver replacement with rewiring of a keypad typically takes two to three hours. We bring the parts, the drop cloths for any indoor keypad work, and shoe covers for the walk to the operator.
We stock common Ghost Controls receiver modules, input terminal strips, loop detectors, and several control board revisions on our trucks, so most Henderson jobs are completed the same day. If your unit needs a less common board, we can usually source it within two business days and will give you a firm completion date before you commit.
No. Latch and Post Gate Repair Henderson is an independent gate service provider; we are not affiliated with Ghost Controls, and we stock parts for other brands families use around Henderson, including LiftMaster, Mighty Mule, and DoorKing.
Call Before You Unplug Anything
We are Cody Beckman and the Latch and Post Gate Repair Henderson crew, part of the Cedarwell family. Every call is answered by a live person around the clock, every quote is written before work starts, and every visit includes shoe covers, drop cloths where they are needed, and a photo of the clean-up before we leave. If you are tired of your Ghost Controls gate not listening, call (775) 210-7739. A gate that works quietly is one you stop thinking about, and that’s exactly the goal.
Written by Cody Beckman, Owner, Latch and Post Gate Repair Henderson at Latch and Post Gate Repair Henderson, serving Henderson and nearby areas.