Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Henderson
Electric gate repair in Henderson usually means one of three things: a motor that quit, a gate that sags past the latch, or a safety sensor that refuses to let the gate close. We handle all three, and we handle them the same way every time, with a written price before we touch anything, shoe covers and drop cloths inside the house, and a call answered by a live person when you ring (775) 210-7739. Henderson’s older neighborhoods keep us busy with legacy operators and corroded hinge posts, while the newer master-planned communities bring their own set of access control and safety sensor issues. We know both.
Why Latch and Post Gate Repair Henderson Is Henderson’s Preferred Electric Gate Repair Company
We are not a general handyman service that happens to look at gates. Electric Gate Repair is what we do, and it is all we do. Cody Beckman leads our Henderson crew with the same calm, specific approach he has used since 2009, when this company started as part of the Cedarwell family of independently owned and operated gate specialists. Henderson homeowners call us because the technician who shows up is background-checked, uniformed, and factory-trained on the exact brands sitting in their side yards.
What does that look like on a Tuesday in Anthem or Green Valley? The technician knocks before touching anything. He asks where the kids are and whether the dogs are inside. He lays a drop cloth from the entry to the gate panel and puts on shoe covers before stepping one foot in the house. Then he explains exactly what he found, what it costs, and what he is going to do about it, in writing, before any work starts. If the gate is not right when he leaves, the 365-Day Done Right Promise means he comes back and makes it right. No argument, no fine print.
Henderson reviews from homeowners keep coming back to the same two words: clean and clear. Clean floors. Clear price. That is the entire promise, and it is not hard to keep if you plan every job around it.
Styles & brands we work with
Electric Gate Motor in Henderson
An electric gate motor in Henderson endures more in one summer than most motors see in five years. Dust, heat, and UV sit on the unit every single day, and a motor installed during the Clinton administration was not built with sealed enclosures or smart boards. When the motor on a swing gate in Green Valley stops responding, the first thing we check is whether the control board is still sending voltage, because many Henderson failures are board-level before they are motor-level.
What We Check First
We test the capacitor, the limit switch, and the wiring connections at the board. On older FAAC and LiftMaster units, we see burned relay contacts and cracked solder joints from years of thermal cycling, a 110degree daytime swing repeated hundreds of times each year. A motor replacement is not the first answer. It is the last answer after the diagnostics prove the motor windings are gone.
When a motor does need replacing, most Henderson jobs run between $450 and $950 depending on gate weight and whether the mounting plate and arm need rework. A full operator replacement on a heavy iron gate can run $950 to $1,800. You will see the exact number in writing before we order anything.
Control Board vs Motor Replacement
Control boards fail before motors in Henderson, often because dust gets into the enclosure and shorts the low-voltage side. A replacement board for a Viking or BFT unit typically runs $225 to $475 installed. If the board is obsolete and cannot be sourced, we tell you that plainly and price a retrofit with a current-model operator, because retrofitting a good motor with a universal board is sometimes the cheaper answer than buying a whole new operator kit.
Gate Access Control in Henderson
Gate access control in Henderson means keypads, remote controls, and safety sensors, and the failure patterns here are predictable. Keypads on western-facing walls get hammered by UV and the membrane buttons crack. Remote receivers on operators installed before sealed enclosures corrode at the antenna connection. Safety photocells collect dust and misalign after years of gate vibration on concrete block walls.
Keypad and Remote Repair
Keypad replacement in Henderson typically runs $165 to $320 depending on the brand and whether we are installing a wired or wireless unit. Remote control programming is usually the cheapest fix on the board, often under $100, and we do not charge extra to program a couple of remotes when we are already on site for another repair.
Safety Sensor Retrofit
Older gates in Henderson were hung before current safety standards required monitored photocells and reversing edges. Retrofitting a set of safety sensors to an existing operator runs $225 to $425. This is a repair we recommend seriously on any gate that young kids or pets can reach, because a 400pound iron gate does not stop when a small body is in the path unless the sensor tells it to.
Trusted Brands We Service in Henderson
We train our technicians on the brands Henderson families actually have bolted to their side walls: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The reason we stock common boards, remotes, and sensors for these brands locally is simple: when your gate is stuck open in July, waiting a week for a part is not acceptable. For the brands on this page, the right fix usually happens on the first visit.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Henderson Homes
- Hinge post corrosion at the soil line. Alkaline, calcium-rich desert soil eats standard mild steel posts, and in Green Valley and Anthem the caliche layer makes the corrosion worse and the digging harder. We replace rotted post bases with galvanized inserts and set them in fresh concrete.
- Gate sag and misalignment from thermal cycling. Years of 110 degree summer heat followed by cold desert nights loosen hinge bolts on powder-coated tubular steel gates from the 1990s. A sag correction bracket often brings the gate back to square without custom fabrication.
- Dead operator boards on legacy LiftMaster and FAAC units. Pre-2005 boards were not sealed against dust, and Henderson dust is fine enough to get everywhere. We diagnose board failure before recommending a motor replacement, because the motor is often still good.
- Photocell and safety edge failures on shared HOA walls. Gates that share a post with a neighbor’s stucco perimeter wall transfer vibration and misalignment into the sensors, and dust builds up on the lenses. We test the entire safety loop, not just the sensor.
Pricing for Electric Gate Repair in Henderson, NV
Henderson electric gate repair pricing is not a mystery, and you should not accept an answer that starts with “it depends” and ends there. A keypad or remote fix runs $100 to $320. A safety sensor replacement runs $225 to $425. A control board replacement runs $225 to $475. A motor replacement runs $450 to $950, and a full operator replacement on a heavy custom gate runs $950 to $1,800. What moves the number within those ranges is gate weight, whether the post needs work, and whether we are retrofitting an obsolete board with a current operator. You get a written price before any work begins, every single time, and that price is quoted and agreed, not estimated and then adjusted. Call (775) 210-7739 for a free estimate.
We Also Serve Cities Near Henderson
Our Henderson crew also covers gate repair calls in Boulder City, Nellis AFB, and North Las Vegas. If you live in one of those areas and your gate is down, the same written-price promise and live-answer phone line apply. Visit our Electric Gate Repair in Henderson page or call (775) 210-7739.
Serving Henderson, NV - Our Local Coverage Area
We’re based in the Henderson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Henderson
Yes, in most cases we can cut out the rotted post section, set a galvanized insert in fresh concrete, and re-hang the original gate panel with a sag correction bracket. This saves the cost and HOA delay of a custom gate replacement and typically runs $350 to $700 for the post work plus hardware. Call (775) 210-7739 and we can look at photos before scheduling.
Replace the operator, not the gate, unless the gate panel itself is rusted through or the hinges are seized. We diagnose the control board and motor separately, and a motor or board replacement on a 20-year-old operator runs in the ranges above. The gate itself often has decades of life left if the posts are sound. Call (775) 210-7739 for an exact diagnosis.
No. Caliche is a concrete-like calcium carbonate layer found in pockets throughout Henderson, most commonly in Green Valley and Anthem, and it is not under every fence. When it is present, post replacement becomes a jackhammer job and we use galvanized or stainless inserts instead of mild steel. That work is slower, but the price is still written before we start.
The most common causes are misaligned safety photocells, a sagging gate that no longer reaches the latch, or a limit switch that slipped out of adjustment as the gate settled. We test the entire safety loop and adjust or replace the failed part. Most of these fixes run between $125 and $350. Call (775) 210-7739 and describe the symptom, and we will tell you what we think over the phone.
Yes. Shared posts are common in Henderson’s HOA subdivisions, and we repair them carefully because we know the post belongs to the wall, not just your gate. We use galvanized inserts for any buried steel we touch, and we can handle the repair without modifying the neighbor’s side of the wall. Call (775) 210-7739 for a written quote.
If your gate is sagging, stuck, or not responding to the remote, call (775) 210-7739. A live person answers, we schedule a time that works for your family, and you get a written price before any work starts. Clean floors, clear price, no surprises.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Henderson, serving Henderson with gate repair, installation, and electric gate repair since 2009.