Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Boulder City
Gate installation in Boulder City runs $1,800 to $6,500 for most residential jobs, and the right design depends on your lot, your setback, and whether you’re in the Historic District. We work throughout Boulder City weekly, from the avenues near Nevada Way down to the newer ranch-style streets off Adams Boulevard. Our crews know which gates hold up to 110°F summers, which track systems survive sand, and what the city will pass on inspection. Call (775) 210-7739 and we’ll give you a written price before anything gets ordered.
Why Latch and Post Gate Repair Henderson Is Boulder City’s Preferred Gate Installation Team
We’re the Cedarwell-family gate specialist for Boulder City, and our team has been installing and repairing gates since 2009. Homeowners here know us for a simple reason: we show up when we say we will, we explain the price up front, and we clean up after ourselves. Our Boulder City customers especially appreciate that we lay drop cloths on the driveway and walkway before we cut, grind, or weld anything. It’s a small habit that makes a difference when dust blows off the open desert.
Every gate installation in Boulder City gets the same routine. A technician arrives in uniform, walks the site with you, explains what we’re doing and why, and writes the price on a work order before the first hole is dug. We wear shoe covers inside your home when we need to run wire to the opener or keypad. We ask before moving anything. And before we leave, we take a photo of the clean job site so you don’t have to wonder what we left behind.
Cody Beckman, the owner behind Latch and Post Gate Repair, holds every job to the 365-Day Done Right Promise. If the gate doesn’t operate the way we said it would, we come back and make it right at no charge. No fine print, no argument.
Styles & brands we work with
Gate Opener Installation in Boulder City
Gate opener installation in Boulder City means adding an automatic operator to a new or existing gate, and it almost always costs between $950 and $2,400 depending on the opener type, the gate weight, and the wiring run. On a typical Boulder City driveway gate, we mount the opener, set the travel limits, wire a keypad and safety photocell, and test the whole system through at least fifty open-close cycles. We quote that price before any work starts, so you see the full number in writing first.
Swing Gate Openers
For a double driveway gate with two leafs swinging inward, we pair the gate with a Viking or Linear operator sized for the panel weight. In Boulder City heat, we mount operators with a slight thermal allowance so the arm doesn’t bind when the steel expands at 3 p.m. in July. We also set the force sensitivity lower than factory default so a child or pet leaning against the gate won’t get pinched.
Slide Gate Openers with Sand Protection
Boulder City lots with short setbacks often need a sliding gate instead of a swing gate. We install rack and pinion drives from BFT or LiftMaster and set the rails on a raised track edge. That raised edge is not a style choice. It keeps wind-blown sand from piling inside the track and jamming the gate after the first windy season. Every slide gate opener we install includes a safety photocell across the opening and a keypad with a backlit keypad face for evening use.
Gate Fabrication in Boulder City
Gate fabrication in Boulder City starts at around $1,400 for a simple steel pedestrian gate and runs $3,200 to $7,800 for a full driveway gate with steel frame, infill, and powder coat finish. When an off-the-shelf panel won’t fit a narrow shared driveway or won’t match the house, we build the gate to the dimensions and style the lot actually needs. We measure on site, fabricate off site, then return to set posts, hang the gate, and adjust the reveal so it closes without scraping.
Historic District Matching
If you live inside the Boulder City Historic District, any new gate has to respect the house it fronts. That means matching the original 1930s proportions, using period-style hinges and latches where the design calls for them, and finishing with powder coating rather than wet paint. Powder coat holds up to Boulder City’s UV without fading to chalk the way paint does. Our fabrication crew keeps period-style hardware on hand so jobs in the Historic District don’t stall waiting on a special-order latch.
Custom Driveway Panels
Some Boulder City homes have a wide driveway opening that standard gate kits don’t span cleanly. We build the frame in sections, weld it square on a jig, and drill for hidden hinges so the panel looks lite but carries real weight. Then we hang it, set the closer or opener, and walk you through the adjustment points so you know what to check each season.
Trusted Brands We Service in Boulder City
We install and service openers and control boards from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Boulder City customers, we keep common BFT, Linear, and Ghost Controls parts in the truck, which means a failed control board or stripped drive gear often gets replaced the same day we diagnose it. When a part is special order, we tell you the lead time and the exact price before we order.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Boulder City Homes
- Swing gates that bind in the afternoon heat. Uncoated steel hinges and unadjusted closers expand in 110°F+ temperatures, and a gate that swings fine at 8 a.m. drags the ground by 3 p.m. We set swing gates with a wider hinge gap and a thermal allowance built into the closer arm.
- Sliding gate tracks packed with desert sand. Strong winds push fine dust into open tracks, and a gate without a raised track edge or a regular lubrication plan seizes within one windy season. The fix is a proper track profile from day one, not a bigger motor.
- Shallow post footings in caliche soil. Boulder City ground is caliche, a hardpan that looks solid but transmits wind load straight to the post. A footing dug too shallow lets the whole gate drift out of plumb. We set posts deep, and we brace them before the pour.
- Failed inspections on tight right-of-way installs. Automatic gates in Boulder City must have a working safety photocell and proper setback. When a DIY install skips the photocell or mounts the keypad at the wrong height, the city flags it. We install to inspection standard the first time.
Pricing for Gate Installation in Boulder City, NV
Here’s what we tell Boulder City homeowners when they ask about cost. A pedestrian gate with steel frame and standard latch runs $1,400 to $2,200 installed. A single swing driveway gate runs $2,300 to $4,800. A sliding gate, which many tight lots on shared driveways need instead of a swing, runs $3,000 to $6,500. Adding an automatic opener to any of these adds $950 to $2,400 depending on the operator and wiring. The written price you get covers materials, labor, hardware, and haul-away of the old gate. You’ll see the number before we start, and it won’t change unless you change the scope. Call (775) 210-7739 for a free estimate at your home.
We Also Serve Cities Near Boulder City
Our Gate Installation team works in Boulder City and the surrounding communities. We regularly install gates for homes in Henderson, Nellis AFB, and North Las Vegas. If you’re outside Boulder City but nearby, call us and we’ll schedule a measure at your property.
Serving Boulder City, NV - Our Local Coverage Area
We’re based in the Boulder City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Boulder City
Yes, and we do it often. A sliding gate works well on a shared Boulder City driveway because the panel moves parallel to the property line instead of swinging across it. We install a rack and pinion drive with a raised track edge to handle blown sand, set the photocell so it doesn’t trip when the neighbor’s car passes, and program two separate keypad codes so both households have entry. The gate is set to stop and auto-reverse if it meets resistance. Call (775) 210-7739 and we’ll measure the shared right-of-way before we quote.
Yes. In the Historic District, new gates have to match the original 1930s character of the house, and the city expects replacement work to use compatible materials and proportions. We keep period-style hinges and latches in stock and finish Historic District gates in powder coat instead of paint, which holds color far longer under Boulder City UV. We’ll handle the design conversation and make sure the gate passes review.
A swing gate needs clearance to arc open, so a short setback from the curb often makes a swing gate impractical or illegal over the sidewalk. A slide gate moves sideways along the fence line and uses almost no depth, which is why it’s the usual choice on tighter Boulder City lots. We’ll bring both measurements to the site visit and tell you which one fits before you spend a dollar.
We use a slide gate track with a raised edge, we lube the drive gear with a dry lubricant that doesn’t attract dust, and we set the opener’s force limits generously so normal sand buildup doesn’t stall the gate. We also give you a written seasonal maintenance note: two minutes a month with a dry brush along the rail and a check of the hinge bolts. That’s the part that keeps Boulder City gates running between service calls.
Most automatic gate openers run on AC power with a battery backup option. If you want the gate to keep operating during an outage, we install a battery backup that holds enough charge for a set number of open-close cycles. In Boulder City, where outages come with monsoon season, we recommend it for any gate that’s the only access to the property. We’ll quote the backup option separately so you can decide what matters.
Call Latch and Post Gate Repair Henderson at (775) 210-7739 for a written estimate on gate installation in Boulder City. We’ll measure your lot, check for Historic District requirements, and hand you a number before any work begins.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Henderson, serving Boulder City as part of the Cedarwell family since 2009.