Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Enterprise
Most gate repairs in Enterprise come down to one of three things: an opener that quit, a hinge that gave out, or a post that shifted in the caliche soil. We fix all three, usually the same day we hear from you. If your gate won’t open, sags against the post, or grinds when it moves, call (775) 210-7739 and a live person will answer, day or night.
Enterprise is different from other parts of the valley, and we know why. The homes were built fast, the gates were often builder-grade, and the soil and sun work against them in specific ways. Our Gate Repair team has seen it all across the newer subdivisions here, from Rhodes Ranch to the communities along Blue Diamond Road and south toward the 215. We don’t just fix gates. We fix the particular problems Enterprise gates develop.
Why Latch and Post Gate Repair Henderson Is Enterprise’s Preferred Gate Repair Company
Homeowners in Enterprise call us for two reasons. First, we answer the phone. Not a service, not a callback queue, a person. Second, the technician shows up with a written price before touching anything, and that price doesn’t move. Cody Beckman built the company that way in 2009, as part of the Cedarwell family, and we’ve kept it that way ever since.
Our techs work across Enterprise regularly, so they know what an HOA in Rhodes Ranch expects versus a single-family home on Warm Springs Road. That matters here, because a lot of what we do on the first visit is documentation and photos for the architectural committee. We don’t mind. We’d rather do it right the first time and keep your HOA off your back.
Every tech is background-checked and uniformed. They put on shoe covers before stepping inside your home, lay down drop cloths, and send you a photo of the cleanup before they leave. Those aren’t extras. That’s the Cedarwell Care Promise, on every visit, at no added charge.
Styles & brands we work with
Gate Welding in Enterprise
Gate Welding in Enterprise is the repair most likely to require HOA documentation before work begins, because it changes visible hardware. When a hinge tears off an ornamental steel gate, or a weld crack turns into a full separation, the fix calls for a technician who can weld, match the existing finish, and keep the work quiet enough for your neighbors.
Most gate welding jobs in Enterprise run $220 – $480 depending on the split and the metal thickness. That includes the written quote, the weld, and cleanup. Here’s what the work usually involves:
Hinge and Post Reinforcements
A gate that tears its top hinge usually did so because the post moved, not because the hinge was weak. We weld the hinge back, then brace the post or reset it in concrete before re-hanging the gate. On Enterprise lots, caliche soil under the post is almost always part of the story.
Ornamental Steel and Wrought-Iron Repairs
Builder-installed ornamental steel in Enterprise tends to crack at the joints within 8 – 10 years, especially where the sun hits hardest. We grind, weld, and grind again so the repair is smooth, then match the powder coat to the HOA-approved finish. If the HOA needs to see the proposed finish before we work, we photograph the existing gate and send it to the management company ourselves.
Commercial Gate Repair in Enterprise
Commercial Gate Repair in Enterprise usually means one of two things: a slide gate that won’t close all the way, or an automatic gate at a community entrance that’s stuck because of a blown circuit board or a misaligned sensor. Either way, the gate controls who gets in. That’s a safety issue, not just an inconvenience.
Commercial slide gate repairs in Enterprise typically run $350 – $900 depending on the drive system, with circuit board replacement for gate operators like LiftMaster or BFT falling in the $300 – $650 range. We quote the full price before work starts, in writing, so the management company knows the number before approving it.
Slide Gate Track and Rack Alignment
Enterprise’s caliche soil expands and contracts enough to push slide gate posts out of alignment. That throws off the rack and pinion, and the gate starts shuddering or slamming at the end of its run. We align the track, reset the posts when needed, and retune the operator limits.
Gate Operator Circuit Boards
In Enterprise, we see circuit boards in south-facing metal control boxes fail from heat buildup, often on LiftMaster and FAAC units at community entry points. We replace the board and, where the design allows, reposition the box or add a heat shield so the next one doesn’t cook in the same spot.
Trusted Brands We Service in Enterprise
We’re factory-trained on the brands families in Enterprise actually have, including LiftMaster, FAAC, BFT, and Linear. The majority of the builder-installed openers out here are Mighty Mule or Ghost Controls units that were cheap to install and predictable to fail. We keep common boards, remotes, and safety sensors stocked locally for Enterprise customers, which means fewer return trips and less waiting than ordering from a warehouse.
Common Gate Repair Problems We See in Enterprise Homes
- South-facing opener circuit boards dying in 5 – 7 years. The metal control box on a sun-blasted stucco wall becomes an oven. The board fails, and the gate stops responding to remotes and keypads. We replace the board and often add a heat shield to keep the new one alive longer.
- Posts leaning out of plumb in caliche soil. The rocky, hard soil under Enterprise shifts with temperature swings. A post that moves half an inch makes a swing gate drag or a slide gate jump its track. We reset the post in concrete and re-hang the gate to swing true.
- Powder coat cracking from UV and wind. Intense sun and the occasional high wind eat at the coating on ornamental steel gates. Once bare steel shows, rust follows within a season. We strip, treat, and repaint to match the HOA-approved color.
- Safety photocell faults from misalignment. When a gate post or the gate itself shifts, the photocells that keep the gate from closing on a car or a kid fall out of line. The gate then refuses to close, or reverses mid-run. We realign the sensors and retest the whole safety cycle.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Enterprise, NV
Here’s what work in Enterprise typically costs. Gate realignment runs $160 – $320. Hinge replacement on an ornamental steel gate, $180 – $380 per hinge depending on size and weld required. Opener circuit board replacement, $300 – $650 installed. Full slide gate track realignment, $350 – $700. Gate welding repairs, $220 – $480. You’ll get a written, itemized price before any work begins, and that’s the number on the invoice. Estimates are free. Call (775) 210-7739 and we’ll send someone out to look at it.
We Also Serve Cities Near Enterprise
Our crew covers Gateway and the surrounding communities regularly. If you’re in Henderson, North Las Vegas, Boulder City, or Whitney, we can usually get to you just as quickly. Same crews, same written-price rule, same cleanup promise.
Serving Enterprise, NV - Our Local Coverage Area
We’re based in the Enterprise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Enterprise
In most post-2000 gated communities in Enterprise, yes. If the repair changes any visible hardware, the architectural committee generally needs photos and a description before you proceed. We handle that for you: we document the existing gate, send the photos to your management company, and start work once approval lands. If the repair is internal, like a circuit board swap with no visible change, approval usually isn’t required, but we’ll check your community’s rules before we start. Call (775) 210-7739 and we’ll walk through your HOA’s specific process.
Mostly heat. Builder-installed openers are often Mighty Mule or Ghost Controls units mounted in metal control boxes on south-facing walls. Over five to seven Enterprise summers, the inside of that box gets hot enough to degrade the circuit board. The board fails, and the gate stops working. We replace the board and, where possible, relocate the box to a shaded wall or add a heat shield to extend the life of the new unit.
Yes, usually. A sagging gate in Enterprise is almost always a problem with the post, the hinges, or both. We weld the hinge back or replace it, then reset or brace the post. The gate itself rarely needs replacement. If the steel is rusted through at a joint, we can cut away the bad section and weld in a new piece, then match the finish to your HOA’s approved color. You’ll see the written price before we start.
Tell us who manages the community and we’ll do the legwork. We submit the photos, the scope of work, and the finish details to the management company on your behalf. When approval comes back, we schedule the work. You don’t have to chase anyone. This is one of the most common requests we field from Enterprise homeowners, and we’ve worked with most of the management companies that serve the area’s gated communities.
Yes. Automatic gates in Clark County must have working safety devices, including photocells and, on many community and commercial gates, loop detectors. If a photocell is misaligned, the gate will usually refuse to close or will reverse for no visible reason. That’s a safety system doing its job, and it needs a trained tech to realign and retest it, not a DIY adjustment. Call (775) 210-7739 and we’ll check the whole safety cycle while we’re on site.
The HOA Reality in Enterprise
Here’s something you won’t hear from a general handyman. In Enterprise, the majority of post-2000 gated communities require architectural committee approval before any gate repair or replacement. Many HOAs mandate matching the original builder-grade ornamental steel finish. That’s a compliance step that doesn’t exist in unincorporated Clark County areas just a few miles away. It changes how the work gets done, and it changes who you should call.
We responded to a call in the Rhodes Ranch community where a Ghost Controls swing gate opener on a south-facing wall had failed after six years. The circuit board was heat-damaged inside its metal control box. Because Rhodes Ranch’s HOA requires approval for any visible hardware change, we first documented the existing gate style and sent photos to the management company. Once approved, we replaced the board and repositioned the box with a heat shield, restoring keypad entry and the safety photocell alignment.
That’s the rhythm of gate work in Enterprise: fix the mechanical problem, respect the architectural review, and leave the gate looking like it belongs to the house. We’ve been doing it that way since 2009, as part of the Cedarwell family of gate specialists, and Cody Beckman still runs the company on the same rules: written price before work starts, shoe covers and drop cloths on every visit, and a cleanup photo before we leave. The 365-Day Done Right Promise backs every repair and installation we do, no fine print.
If your gate is acting up in Enterprise, call (775) 210-7739. A live person answers. We’ll set up a time, show up with a written price, and handle the HOA paperwork if your community needs it. That’s the whole job.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Henderson, serving Enterprise since 2009.