Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterWeld & Rust Repair in Henderson, NV
Weld and rust repair in Henderson typically costs between $180 and $650 depending on whether we’re patching a rusted-through gate frame, reinforcing a cracked weld, or rebuilding a hinge mount that has corroded in the desert heat. Most jobs are completed in a single visit, and you’ll see the exact number in writing before we touch anything. Latch and Post Gate Repair Henderson handles this work daily for homeowners throughout Green Valley, Anthem, Inspirada, and older neighborhoods near Water Street where wrought iron and steel gates have spent years in the Nevada sun. For gates that need more than rust fixes, our Automatic Gate Repair covers the full range of mechanical and electrical issues.
This is specialized work, not a general handyman task. A welded gate frame carries real weight, and a failed weld doesn’t just sag. It can drop a 200-pound gate onto a driveway, a car, or a child. That’s why our Gate Repair team treats every weld and rust job as structural work, not cosmetic touch-up. We’re part of the Cedarwell family of gate specialists, and we’ve been fixing gates here since 2009.
If your gate has rust blooms along the bottom rail, a crack running through a weld point, or a hinge that’s pulling away from the post, call (775) 210-7739. A live person answers, day or night.
When You Need Weld & Rust Repair
Henderson’s climate is dry most of the year, but we get enough monsoon-season rain and irrigation overspray to keep rust active on unprotected steel. Here’s what we regularly see across the valley, from the newer stucco communities in Inspirada to the 1990s ranch homes on the east side:
- Rust-through on the bottom rail. Water pools inside the hollow tubing and eats outward. You’ll see flaking paint and orange staining near the ground, often hidden by the gate’s lowest bar.
- Cracked or separated welds at hinge points. Hinges carry the gate’s full weight every time it opens. When the weld fatigues, the gate starts to lean or drag against the post.
- Pitting on ornamental iron details. Decorative scrollwork and finials on older Anthem and Green Valley homes rust from the inside out. By the time it’s visible, the metal is often thin enough to snap.
- Sagging gates with flaking paint. A gate that scrapes the driveway is usually fighting both alignment and metal fatigue. Grind away the rust and you often find hidden weld cracks underneath.
- Hinge mounts pulling away from the post. On metal posts, the weld itself breaks down. On concrete block or stucco posts, the anchor bolts corrode and lose grip.
- Missing chunks of metal along the frame. In older neighborhoods near Boulder Highway, we see gates where rust has removed entire sections of the bottom rail. Those need to be cut out and replaced before they collapse.
Our Weld & Rust Repair Process
The way we work at your home matters as much as the repair itself. Our technicians follow the Cedarwell C.A.R.E. values on every visit: Clean up like it is our own home, Ask before we move or touch anything, Respect your family’s time and quiet hours, and Explain the price before the work. Here’s the process we follow on a typical weld and rust repair in Henderson:
- We assess the damage and write the price. Our tech examines the full gate, the posts, and the hinges. Then you get a written price before any work starts. No pressure, no mystery line items.
- We protect what’s around the gate. If the gate is attached to the house or near a finished entryway, we lay drop cloths and put down a barrier to catch grinding sparks and metal dust. We wear shoe covers when we step inside.
- We strip the rust and prep the metal. We grind or wire-wheel the affected areas down to clean steel, cut out any metal that has thinned past saving, and prepare the surface so the new weld or patch actually bonds.
- We weld, patch, or rebuild. Depending on what we found, we either re-weld the cracked joint, weld in fresh steel plate or tube, or rebuild the hinge mount. We work on LiftMaster, FAAC, and BFT electric gate components too, so if your gate has an opener, we make sure the frame repair doesn’t interfere with the motor or track.
- We prime and seal against the desert climate. Bare steel in Henderson rusts fast, even in the dry months. We apply a rust-inhibiting primer and a coating matched to your gate before we pack up.
- We test the gate and show you the cleanup. We open and close the gate several times, check the welds from both sides, and take a photo of the work area after we’ve cleaned it. You’ll see the space left the way we found it, just with a stronger gate.
Everything we do is covered by the 365-Day Done Right Promise. If the weld fails or the rust comes back within a year, we make it right. No argument, no fine print.
Weld & Rust Repair Pricing in Henderson
Most weld and rust jobs in Henderson fall between $180 and $650. Small rust removal and touch-up work starts around $180. A cracked hinge weld usually runs between $220 and $380. Cutting out and replacing a rusted bottom rail section runs from $350 to $650 depending on how much steel needs to go in.
Here’s what shapes the number:
- How far the rust has spread. Surface rust is quicker than rust that has eaten through the metal. If we need to cut out and replace sections, the materials and time go up.
- Weld location and access. Hinge-side welds are structural and take longer than a decorative scroll repair. Gates set close to a wall or hedge add time too.
- Gate size and material. A lightweight 6-foot pedestrian gate costs less to repair than a heavy 16-foot driveway gate. Ornamental iron with custom details takes more care than plain square tube.
- Electric opener involvement. If your LiftMaster or FAAC opener is mounted to the gate, we factor in alignment and clearance so the repaired frame doesn’t strain the motor.
- Coating and finish work. Priming and painting are included in our repair process. If the whole gate needs refinishing rather than just the repaired section, that’s priced separately and shown upfront.
There is no charge to come out and look. We’ll give you a written price on the first visit, and you decide whether to proceed. Call (775) 210-7739 to schedule your free estimate.
FAQs – Weld & Rust Repair
How much does it cost to repair rust on a gate in Henderson?
Rust repair on a Henderson gate typically costs between $180 and $650 depending on how deep the corrosion goes and whether sections need to be replaced. We provide a written price before any work begins, so you’ll know the exact number on the first visit. Call (775) 210-7739 for a free estimate.
Can you fix a broken weld on a gate?
Yes. We grind out the failed weld, prep the metal, and lay a new structural weld that holds the gate’s weight properly. Fixing a cracked hinge weld usually runs between $220 and $380. All of our weld work is covered by the 365-Day Done Right Promise, so if it doesn’t hold, we make it right.
Is it cheaper to repair rust or replace the gate?
Repairing rust is almost always cheaper, as long as the gate frame is still structurally sound. A patch-and-seal job runs in the hundreds, while a new custom driveway gate in Henderson can run $2,500 to $8,000 or more. We’ll tell you honestly if a repair won’t last, and we won’t recommend a replacement just to inflate a ticket.
Can you come today to repair my gate in Henderson?
In many cases, yes. We keep our schedule open for same-day weld and rust repairs across Henderson, especially when a gate failure is leaving a property unsecured. Call (775) 210-7739 and a live person will tell you exactly when we can be there.
Do you work on electric gates that need weld repair?
Yes. We regularly repair rust damage and weld cracks on electric gates with LiftMaster, FAAC, BFT, and Linear openers. The frame work is handled with the opener’s alignment and travel range in mind, so a repair doesn’t shorten the motor’s life. If the gate has shifted on its hinges, we also perform Gate Realignment to restore smooth travel.
Call Latch and Post Gate Repair Henderson
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on, and it’s why our Gate Repair in Henderson work holds up in this climate. When rust and failed welds threaten your gate, we bring the same care to the repair that we bring to the cleanup: shoe covers on, drop cloths down, written price in hand, and quiet tools when the kids are asleep. If your gate is rusting or a weld is cracking, call (775) 210-7739 today and we’ll set up a free estimate. A real person answers, 24 hours a day.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Henderson, serving Henderson.