Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Whitney, NV
Most gate problems in Whitney come down to two things: the sun and the soil. Intense Mojave UV breaks down hinges, warp tubular steel, and fade powder coating faster than homeowners expect, while caliche-heavy ground shifts beneath concrete footings and pulls posts out of alignment. Twin that with Whitney’s high concentration of mid-2000s planned-community homes, most with ornamental steel gates set in concrete, and you get a specific set of repair patterns we see week after week. Latch & Post Gate Repair handles gate repair, gate installation, and electric gate repair across Whitney, with written pricing before any work begins. Call (775) 210-7739 for a free estimate.
Why Whitney Homes Are Different
Whitney’s housing stock is overwhelmingly single-family homes built between roughly 2005 and today, arranged in master-planned subdivisions with HOA-governed streetscapes. The gates out here tend to be tubular steel or wrought iron, set in concrete footings poured into desert soil. That soil is the quiet troublemaker. Caliche, a hardened calcium carbonate layer common across the Whitney area, expands and contracts differently than the concrete above it. Over a decade of summer heat and monsoon moisture, posts drift, gates sag, and latches stop meeting strike plates squarely.
Summer temperatures above 100°F punish exposed metal. Powder coating oxidizes, hinge pins wear faster, and poorly lubricated rollers grind. Then comes the monsoon season. Flash flood runoff from dry washes near Sunset Road and surrounding lower-lying subdivisions eats at post bases, leaving gates that swing loose or bind against the ground. We see a clear spike in Whitney service calls the week after a strong monsoon storm. The work here isn’t generic gate repair, it’s alignment, hinge replacement, and post resetting built around caliche and runoff.
Styles & brands we work with





Our Main Whitney Services
Three services cover nearly every gate issue Whitney homeowners encounter: repairing what’s worn or misaligned, installing new gates built for desert conditions, and fixing the electric operators and safety systems that automate them.
Gate Repair in Whitney
Most Whitney repair calls start as a gate that drags, won’t latch, or swings crooked. We replace bent hinges, reset posts that caliche movement has shifted, and rehang gates so they close square. Whitney’s steel gates take extra UV stress, so we inspect for rust at the weld points and touch up finishes where possible. Every visit includes a written price before work starts, shoe covers and drop cloths if we step inside, and a photo of the clean-up before we leave. Gate Repair in Whitney covers the full scope.

Gate Installation in Whitney
New gates in Whitney need footings planned around caliche, not just concrete poured to a standard depth. We build for drainage so monsoon runoff doesn’t undermine posts two years in. Most installations here are tubular steel or modern aluminum, often matched to existing subdivision fencing and HOA finish requirements. Whether you’re replacing a worn side-yard gate or adding a full driveway gate, we measure, quote a written price, and schedule the work around your household. Gate Installation in Whitney explains what a full install includes.

Electric Gate Repair in Whitney
Electric gates in Whitney face two local enemies: heat and dust. Control boards heat-soak in summer, limit switches drift, and dust fines get into gearboxes. We service operators from FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, diagnosing the actual fault rather than swapping parts on a guess. If opener work requires a licensed electrician for the power run or panel work, we’ll tell you plainly and coordinate. Electric Gate Repair in Whitney has the full breakdown.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Whitney
Our Whitney trucks carry common repair parts for FAAC, BFT, Linear, and Viking operators, along with hinge pins, rollers, and latch hardware for the steel gates common in local subdivisions. That local stock means many Whitney repairs wrap up on the first visit. See our brands for the complete list of equipment we’re factory-trained on.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Whitney, NV
| Service | Typical range in Whitney |
|---|---|
| Standard gate latch replacement | $135 – $245 |
| Hinge replacement (per pair) | $185 – $360 |
| Gate post reset / realignment in caliche soil | $240 – $480 |
| Weld repair at hinge or frame joint | $140 – $285 |
| Gate frame straightening | $190 – $390 |
| Full gate alignment and adjustment | $140 – $260 |
| Electric opener diagnosis and minor repair | $185 – $360 |
| Limit switch replacement | $150 – $280 |
| Control board replacement | $290 – $520 |
| Gate roller and track replacement | $190 – $340 |
Costs in Whitney move up when caliche has shifted a post badly enough to require new concrete, or when UV damage means replacing powder-coated sections rather than touching them up. Whatever the job, you’ll see the exact number in writing before we touch anything. No surprises on the invoice.
Neighborhoods We Serve in Whitney
We work throughout Whitney and the lower-lying subdivisions where monsoon runoff causes the most post movement. Response times in the Whitney area are typically same-day for repairs and within a few days for scheduled installations. We serve:
- Sunset Road corridor neighborhoods
- Subdivisions southeast of Boulder Highway
- Communities near Whitney Mesa
- Neighborhoods around Russell Road and Sandhill Road
- Planned communities along Stephanie Street
Service Area – Cities Near Whitney
Whitney sits close to several Las Vegas Valley communities we also serve. Gate repairs in Henderson, NV and Green Valley, NV often involve the same caliche soil patterns we see in Whitney, while North Las Vegas, NV and Boulder City, NV each have their own gate and soil profile. Wherever the job is, the written-price promise and cleanup routine stay the same.
Serving Whitney, NV - Our Local Coverage Area
We’re based in the Whitney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Whitney
Most Whitney gate repairs are scheduled same-day when you call before mid-afternoon. Installations take longer because we measure first, then order and schedule. Call (775) 210-7739 and we’ll give you a straight answer on timing for your specific job.
Many Whitney subdivisions have HOA design standards for gate finish, height, and style, especially on street-facing gates. We can match existing finishes and provide the specifications your HOA asks for. Check your community’s guidelines before installation, and we’ll work within them.
Yes. We repair and install everything from single walk gates to double driveway gates and automated entry systems. Physical repair and installation are handled in-house; if a job needs electrical or gas work beyond the gate equipment, we’ll coordinate a licensed tradesperson and tell you the plan before anything starts.
If your gate is sagging, dragging, or not latching in Whitney, call (775) 210-7739. We’ll give you a written price, protect your floors and finishes, and make the repair right or the visit is covered by the 365-Day Done Right Promise. Estimates are free.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Whitney Customers Say
"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"Nice work on a sagging gate and a new hinge. The part took a few days so it was two trips, but they explained it and were tidy and polite each time."
- Marco Tillman"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide