Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Boulder City, NV | Latch and Post Gate Repair Henderson
Gate Repair - Boulder City: is your Ghost Controls gate opener acting up? We’re Latch and Post Gate Repair Henderson, an independent service provider, and yes, we work on Ghost Controls systems across Boulder City every week. The one thing that makes our Ghost Controls work different here: we know the specific ways Boulder City’s 110-degree afternoons and fine desert dust wear down these openers, and we fix them to last. Call (775) 210-7739 for a free estimate, or read on to understand what’s going on with your gate.
We’re factory-trained on Ghost Controls equipment, but we’re not manufacturer-affiliated or an authorized service center. What that means for you: we recommend the right fix for Boulder City conditions, not the fix Ghost Controls corporate would script from a call center in Florida. We’ve repaired Ghost Controls openers on hundreds of Boulder City properties, from historic bungalows near downtown to newer ranch homes with automatic driveway gates. When we work on your system, we treat it like it’s on our own block. Because in a town this size, it often is.
Why Boulder City Residents Choose Us for Ghost Controls Service
Cody Beckman, our owner, grew up in Los Angeles and learned welding and metal fabrication at Los Angeles Trade-Technical College before spending the better part of two decades focused entirely on gate systems. He’s the one who decided our Ghost Controls service should carry the same approach everywhere: written price before any work starts, shoe covers and drop cloths on every visit, and a photo of the cleanup before our tech leaves. That’s the Cedarwell Care Promise, and it’s non-negotiable.
Boulder City homeowners call us because we understand the two things that kill Ghost Controls equipment here: heat and dust. Not generic heat and dust, specifically the kind that comes off the open desert and settles into every track, hinge, and control board. We keep the parts that matter for Boulder City service stocked locally, so we’re not waiting on a warehouse in another state while your gate won’t close. And if you have a 1930s wrought iron gate in the Historic District, we’ve already retrofit at least a dozen Ghost Controls openers onto period hardware without changing the original look. That institutional knowledge matters. You can’t get it from a general handyman, and you can’t get it from a big-box service center.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Boulder City
Here’s what we see most often on Ghost Controls systems in Boulder City:
- Afternoon stalling on hot days. Armature brackets warp and misalign when afternoon temperatures exceed 110°F, especially on black wrought iron gates that absorb full sun. The fix usually involves realigning the bracket and replacing any hardware that’s lost its temper.
- Grinding or intermittent stalling on sliding gates. Fine desert sand packs into the linear screw or chain drive on Ghost Controls sliding openers near open lots. It sounds worse than it is, but it needs cleaning and re-lubrication, or it will burn out the motor.
- Lost remote or keypad programming. Control board capacitors degrade under intense UV exposure in Boulder City. You lose programming even with battery backup, and it usually happens right after a dust storm or heat spike. We replace the board only when board-level repair won’t hold.
- Solar opener failures. Dust coating cuts solar panel efficiency, and battery connectors corrode from alkaline desert dust. Your AXP1 solar opener runs fine in spring, then dies by June. We clean panels, replace corroded connectors, and test battery health.
- Ghost Controls HYDP1 hydraulic gate opener issues. Hydraulic systems run hotter in Boulder City’s climate, and the fluid degrades faster. Slow operation or uneven swing is often old fluid and worn seals, not a dead motor.
Ghost Controls Service in Boulder City: What Local Conditions Mean for Your Equipment
Boulder City’s Historic District requires gate hardware to match original 1930s wrought iron profiles. That’s a city ordinance-backed reality you won’t find in Henderson or North Las Vegas, and it changes how Ghost Controls repair work goes here. When we retrofit a modern Ghost Controls opener onto a period gate, we can’t just bolt on a generic bracket and call it done. We custom-fabricate powder-coated adapters that blend with the original latch and post details, then match the powder coat color to the existing ironwork. It’s a different job than the neighbors in Green Valley face. Their gates are newer, the city doesn’t have preservation codes on them, and a standard bracket works fine.
Out near the open desert lots on the edge of town, the problem shifts. Dust gets into everything. On a 1938 bungalow on Avenue B in the Historic District, our tech replaced a bent armature bracket on a Ghost Controls TDS2XP dual opener after summer heat warped the steel, then realigned both gate leaves and swapped in a powder-coated bracket that matched the original ironwork. We also cleaned the track and sealed the control board against dust so the homeowners didn’t lose remote access again during a windy week. That’s the Boulder City version of Ghost Controls repair: half mechanical skill, half preservation awareness.
Ghost Controls Models & Products We Service in Boulder City
We service the Ghost Controls equipment Boulder City homeowners actually own: the TDS2XP dual gate opener kit, TSS1XP single swing gate opener, AXP1 solar gate opener, and HYDP1 hydraulic gate opener. For electronics, we use genuine Ghost Controls specialists‘ replacement arms, control boards, and remotes whenever lead times allow. For non-electronics, we may switch to powder-coated aftermarket brackets or reinforced hinges when original parts can’t survive Boulder City UV. That judgment call is the difference between a repair that lasts two seasons and one that lasts a decade. We’ll explain which parts we’re using and why before any work starts.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Boulder City
Ghost Controls repair in Boulder City typically runs between $180 and $340 for most armature, bracket, and control board work when the motor is still healthy. A full arm replacement or motor swap can push higher, depending on the model. Solar panel cleaning and battery wiring repairs usually come in under $200. The factors that move the price: whether the gate is a single or dual opener, how much custom fabrication is needed to match historic ironwork, and whether parts have to be sourced from Ghost Controls directly. You’ll see the exact number in writing before we touch anything, and we’ll never start a job without your approval on that figure. Call (775) 210-7739 for a free estimate.
Serving Boulder City, NV - Our Local Coverage Area
We’re based in the Boulder City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Boulder City
Afternoon stalling is almost always thermal expansion. When summer temperatures push past 110°F, the steel in your gate and the armature bracket expands, and the bracket warps just enough to throw the alignment out of spec. Your opener senses the resistance and stutters or stops. We realign the bracket, check the gate’s swing range, and replace hardware that’s lost its temper. Call (775) 210-7739 and we’ll set up a time to look at it.
Yes, and we do it regularly in Boulder City’s Historic District. We custom-fabricate powder-coated adapters that let a modern Ghost Controls opener mount to original 1930s hinges and posts. The opener stays out of sight where possible, and the adapter color is matched to the existing ironwork. The gate keeps its original profile, and you get push-button access.
Both, and we’ll tell you which and why. For electronics like control boards, remotes, and drive arms, we use genuine Ghost Controls parts whenever available. For non-electronics like brackets and hinge hardware, we’ll often use powder-coated aftermarket parts because they survive Boulder City’s UV and heat better than original painted steel. The decision gets explained in writing before any work starts.
Every 60 to 90 days in Boulder City, and more often if you live near an open desert lot. Wind-blown sand packs into the screw or chain drive, and the gate starts to grind or stall. Clean the track thoroughly, then lubricate with a dry-type lubricant that doesn’t attract more dust. We’ll also check the motor mounts and control board housing for dust ingress during regular service. It’s a quick job, but skipping it shortens the life of your opener by years.
Dust gets inside the keypad housing and clogs the membrane contacts. Sometimes a careful cleaning restores it. Other times, the control board capacitor has degraded from UV exposure and needs replacement. We’ll test both during the visit. Call (775) 210-7739 and we’ll come take a look; most keypad and control board repairs run between $150 and $250.
Service Areas Near Boulder City
We serve Boulder City and the surrounding area, including Ghost Controls service in Henderson, Ghost Controls service in North Las Vegas, Whitney, Green Valley, and Anthem. If you’re not sure whether we cover your street, call (775) 210-7739 and ask. A live person answers every call, day or night.
Book Your Ghost Controls Service in Boulder City Today
Your gate doesn’t have to stay stuck. Call (775) 210-7739 and we’ll schedule a time to come out, diagnose the problem, and give you a written price before any work begins. A gate that works quietly is one you stop thinking about, and that’s exactly the goal.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Henderson, serving Boulder City since 2009.