A Latch company - serving Henderson, NV

Lock Repair in Henderson, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Lock Repair in Henderson, NV

A gate lock that sticks, won’t turn, or won’t hold leaves your family’s yard less secure than it should be. Lock repair in Henderson typically costs between $95 and $285 depending on the lock type and what’s failed, and most repairs are completed in a single visit. You’ll see the exact number in writing before we touch anything. If you’re dealing with a lock that’s no longer doing its job, call Latch and Post Gate Repair Henderson at (775) 210-7739 and we’ll walk through what’s happening.

We’re a Cedarwell-family gate specialist, which means we focus on one thing: the gates, latches, and locks that keep Henderson homes closed and controlled. That’s the entire scope of our work. Not general handyman work, not a dozen unrelated trades. Every gate comes down to two parts, the latch that holds it and the post that carries it. The lock is the piece you touch every day, and when it starts to fail, you notice. See our broader Gate Repair service for everything else we cover on a gate.

When You Need Lock Repair

Most Henderson lock problems start small: a key that needs jiggling, a latch that scrapes, a keypad that only works sometimes. Catching those early signs before the lock stops working entirely saves you money and keeps your gate doing its actual job. Here’s what we see most often across Henderson, from Anthem to Green Valley Ranch to Lake Las Vegas:

  • The key won’t turn at all. Henderson’s dry air and fine dust work their way into lock cylinders over time. The dust mixes with old lubricant, and eventually the pins inside seize. A stuck cylinder is almost always repairable without replacing the whole lock.
  • The latch doesn’t fully seat. As Henderson’s clay-heavy soil shifts through hot summers and occasional rain, gate posts settle slightly. A latch that used to click now only half-catches. That’s a post-alignment issue, not just a lock issue, and it needs to be fixed at both ends.
  • The keypad or remote works intermittently. On electric gate locks tied to keypads or remotes, a bad connection at the lock release can mimic a failing opener. We test the lock itself before replacing anything upstream so you’re not paying for parts you don’t need.
  • The lock turns but the gate won’t open. This usually points to a broken internal tailpiece or a slipped spindle, the small metal pieces that connect the cylinder to the latch mechanism. It’s a common failure on older welds and brass components in Henderson’s temperature swings.
  • Rust and corrosion at the lock face. Proximity to irrigation overspray, especially in neighborhoods with grass and shrubs near the gate, accelerates rust on exposed lock hardware. We’ll tell you honestly whether the cylinder can be cleaned and rebuilt or whether replacing the lock body is the better long-term move.

Whatever symptom you’re seeing, describe it when you call (775) 210-7739. Our technicians can usually identify the likely cause before they even arrive, which means they come with the right parts on the truck.

Our Lock Repair Process

Here’s exactly how a lock repair with us goes, from the first call to the moment we leave your driveway:

  1. Call and describe the issue. A live person answers, any hour, any day. No voicemail and no callback queue. We ask what kind of lock you have, what it’s doing, and whether anything changed recently.
  2. You get a written price before work begins. Our technician arrives in a marked vehicle, looks at your lock, and writes down the exact cost on paper before touching a tool. That number includes parts, labor, and the trip. If you decide not to go ahead, there’s no charge and no pressure.
  3. We lay down protection before we start. Shoe covers go on before we step inside your home. Drop cloths go down wherever we’re working, inside or out, so your floors and entryway stay clean. If a pet is nearby, we’ll ask before moving anything they might be watching.
  4. The repair itself. We disassemble the lock, identify the failed component, replace or rebuild it with the correct part for your hardware, and test the full cycle: key, latch, and any connected opener or keypad. We service locks on LiftMaster, FAAC, BFT, and Linear gate systems, among others.
  5. Cleanup and proof. Before we leave, we take a photo of the cleaned work area and show you. That’s a Cedarwell C.A.R.E. standard on every visit: Clean up like it’s our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, and Explain the price before the work.

Lock Repair Pricing in Henderson

What you’ll pay depends on the lock type and what’s failed. Here’s a realistic breakdown of what we charge for common lock repairs in Henderson:

Lock Repair Service Typical Price Range
Cylinder rebuild or rekey (keyed lock) $95 – $145
Latch replacement (misaligned or broken) $110 – $185
Solenoid or release mechanism (electric locks) $165 – $285
Keypad or remote integration check and wiring $95 – $175
Full lock body replacement (parts + labor) $185 – $325

Three things affect cost the most. First, whether we’re repairing the existing lock or replacing it entirely, because a rebuild is usually cheaper than new hardware. Second, whether the misalignment is in the lock itself or the gate post, because a post that’s shifted requires gate realignment before any new lock will work reliably. Third, the age of the system; older electric lock solenoids from early LiftMaster and Linear gate openers often need replacement rather than repair.

Every quote includes a written total before we start. No added trip fees, no surprise line items. Estimates are free. Call (775) 210-7739 and we’ll give you a straight number for your specific setup.

FAQs – Lock Repair

How much does gate lock repair cost in Henderson?

Gate lock repair in Henderson typically runs between $95 and $285, depending on whether we’re rebuilding the existing cylinder or replacing the full lock body. You get a written price before any work begins, so there’s no guessing. Call (775) 210-7739 for an exact quote, free of charge.

Is it cheaper to repair a gate lock or replace it?

Repairing the existing lock is almost always cheaper, usually $95 to $185, versus $185 to $325 for a full replacement. The exception is when the lock body itself is corroded or cracked, at which point weld and rust repair may not be enough and rebuilding a failing unit means paying again later. We’ll show you the failed parts and explain the repair-versus-replace decision before you commit.

Can you fix my gate lock today?

In most cases, yes. A live person answers our phone 24/7, and our Henderson-based technicians can usually be out the same day for a lock repair. Call (775) 210-7739 and describe the symptom; we’ll give you an honest arrival window, not a half-day guess.

Do you work on electric gate locks, or just keyed ones?

We work on both. Many Henderson homes have electric release locks tied to LiftMaster, FAAC, BFT, or Linear automatic gate openers, and we service those solenoids, wiring connections, and keypad interfaces alongside traditional keyed locks. If your gate has both a keyed cylinder and an electric release, we’ll test everything in one visit.

Will your technician track dirt into my home while fixing the lock?

No. Our technicians wear shoe covers and lay drop cloths before stepping inside or working in your entryway, on every visit, at no extra charge. Before we leave, we photograph the cleaned area so you can see exactly how we left it. That’s part of the Cedarwell C.A.R.E. routine we follow on every job.

Why Henderson Homeowners Call Us for Lock Repair

Cody Beckman has been serving Henderson gates since 2009, and the service runs on a simple set of rules: show up when we say, write the price down before we work, and leave the place cleaner than we found it. Those aren’t marketing phrases. They’re the Cedarwell C.A.R.E. values our technicians are hired and trained on.

Every lock repair we complete is covered by the 365-Day Done Right Promise. If the repair isn’t right, we make it right. No argument, no fine print, no revisiting the invoice. That promise is why we take the time to test every component before we leave, whether it’s a keyed cylinder on a side gate in Green Valley or an electric release on a driveway gate near Lake Las Vegas.

We also respect what’s happening around the gate. If your kids are asleep, we’ll use quiet hand tools where possible. If you have indoor pets, we’ll ask where they are before we open the door. We choose pet-safe lubricants where there’s a choice. These details don’t show up in a parts list, but they’re the difference most Henderson families notice.

Lock Repair for the Gate Brands Henderson Actually Uses

Most of the lock failures we see are on hardware families that were installed years ago and have simply worn down. We’re factory-trained on the brands families in this area actually own, including LiftMaster and Linear electric releases, plus FAAC and BFT hardware on higher-end driveway systems. If your lock matches one of those systems, we already know the part numbers and failure patterns, which means fewer trips and a correct fix the first time.

If you’re not sure what brand your lock is, don’t worry about it. Describe what it’s doing, and we’ll figure it out when we take a look. That’s what the free estimate is for.

Get Your Henderson Gate Lock Fixed

A lock that’s starting to fail won’t fix itself, and the longer it grinds against misalignment, the more parts wear. If your key sticks, your latch won’t hold, or your keypad only works some of the time, call (775) 210-7739 for a free estimate. We’ll answer with a real person, schedule a visit that works around your day, and hand you a written price before any work starts.

Latch and Post Gate Repair Henderson serves all of Henderson, including Green Valley Ranch, Anthem, Seven Hills, Whitney Ranch, and the neighborhoods around Lake Las Vegas and MacDonald Ranch. If you need broader gate work beyond the lock, start with our Gate Repair in Henderson page for the full picture.

Written by Cody Beckman, Owner at Latch and Post Gate Repair Henderson, serving Henderson.

Need Gate Repair help in Henderson? Licensed & insured · within the hour response · free estimates
Call (775) 210-7739
Local Service Coverage

Request a Free Estimate in Henderson

Tell us what you need - Latch and Post Gate Repair Henderson responds fast. No obligation.

When you submit this form, you accept our Privacy Policy and agree to be contacted via phone, email, or SMS about your request, including by the independent professionals who may fulfill it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch