Sliding driveway gates
Wrought iron
Wood & steel frame
Farm & ranch
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterDriveway Gate in Henderson, NV
A driveway gate does two jobs at once: it controls who enters your property and it sets the tone for how your home feels when you pull in. We install and service driveway gates throughout Henderson, from swing gates in Anthem and MacDonald Highlands to slide gates in Green Valley Ranch and Inspirada, and we also handle pedestrian gate projects. If your gate is sagging, stuck, slow, or simply not there yet, call us at (775) 210-7739 and we’ll give you a straight answer about what’s needed and what it costs.
Most driveway gates come down to three elements: the gate itself, the opener that moves it, and the posts that carry the weight. We handle all three. We’re a gate specialist, not a general handyman. That means we’re factory-trained on the openers Henderson homeowners actually use, and we arrive with a written price in hand before any work begins. For a broader look at how a gate fits into your property, see our Gate Installation page.
Key Takeaways
- Driveway gate installation in Henderson typically ranges from $2,800 to $9,500 depending on gate size, material, opener type, and site prep
- We service LiftMaster, FAAC, and BFT openers, plus steel, iron, aluminum, and composite gates
- Every visit includes a written price before work starts, shoe covers and drop cloths inside, and a cleanup photo before we leave
- The 365-Day Done Right Promise covers every installation and repair we perform
- A live person answers our phone 24/7, including weekends and holidays
When You Need Driveway Gate
Henderson homeowners call us for driveway gate work for a handful of reasons. Here are the situations we see most often:
- Your gate sags and scrapes the ground. In Henderson’s clay-heavy soil, gate posts shift over time, especially after monsoon-season rain. A sagging gate wears out hinges and opener gears faster than anything else we see.
- The opener runs but the gate barely moves. We frequently find stripped gears in LiftMaster and FAAC openers in Henderson. The motor hums, but the gate won’t budge. That’s usually a rebuildable gear assembly, not a full replacement.
- Your gate jerks or stutters when opening or closing. This often points to worn rollers on a slide gate or failing hinge bearings on a swing gate. Left alone, it damages the opener.
- You’re building new and want a gate that fits the house. We work with homeowners and contractors in Inspirada, Cadence, and Lake Las Vegas to spec the right gate before the stucco goes up.
- Your existing gate is manual and you’re tired of it. Converting a manual gate to electric is a common job for us. We’ll match the opener to the gate’s weight and your access needs.
- The gate was hit or damaged. Wind-blown debris, a bumped post, or a vehicle clip can knock a gate out of alignment. We do hinge, post, and panel repair after impacts.
If any of these sound familiar, call (775) 210-7739. We’ll ask a few questions about your gate and your property, and we can usually tell you over the phone whether it’s a repair or replacement situation.
Our Driveway Gate Process
We follow the same routine on every driveway gate job in Henderson. It’s designed so you always know what’s happening, what it costs, and what we’ll leave behind.
- You call, a person answers. Not a voicemail. A live person at (775) 210-7739, any hour, any day. We’ll ask about your gate type, what it’s doing, and when you can have us out.
- We arrive and inspect. Our technician checks the posts, hinges, rollers, opener, limits, and power supply. We give you a written price before any work begins. No pressure, no obligation.
- We lay down protection. If the gate job touches your garage, entry, or any interior space, we put on shoe covers and lay drop cloths. Your floors stay clean. That’s part of the Cedarwell Care Promise, not an add-on.
- We do the work. Whether it’s a post reset, hinge replacement, opener install, or full gate fabrication, we handle it on the spot in most cases. If a part needs to be ordered, we tell you exactly when we’ll return.
- We test and clean. We run the gate through several cycles, set the limits and force settings, and make sure the safety sensors work. Then we clean up and send you a photo of the finished work area.
Driveway Gate Pricing in Henderson
Driveway gate work in Henderson is priced by the job, not by the hour. Here’s what you can expect based on the work we commonly do in this area:
- Gate opener replacement: $850 to $2,400 installed, depending on opener type and gate weight
- New gate installation (single swing, steel or aluminum): $2,800 to $5,500 complete with opener
- New gate installation (double swing or slide): $5,000 to $9,500 complete with opener, posts, and concrete work
- Post reset or replacement: $450 to $1,800 depending on post size and footer depth
- Hinge or roller replacement: $180 to $650 including parts and labor
- Manual-to-electric conversion: $1,200 to $2,800 including opener, wiring, and control setup
What moves the price? Gate size and weight are the biggest factors. A 16-foot steel slide gate costs more than an 10-foot aluminum swing gate. Site conditions matter too: existing concrete, post condition, and electrical access all play a role. We quote the exact number in writing before we touch anything, so there’s no surprise at the end. Estimates are free. Call (775) 210-7739 to schedule one.
FAQs – Driveway Gate
How much does a driveway gate cost in Henderson?
A complete driveway gate installation in Henderson typically runs between $2,800 and $9,500 depending on gate size, material, opener type, and site preparation. For a detailed breakdown, see our guide on how much gate installation costs in Henderson, NV. Repairs are less: a hinge replacement runs $180 to $650, and an opener replacement runs $850 to $2,400. You’ll get a written price before any work starts, and the estimate is free. Call (775) 210-7739 for an exact quote on your gate.
Can you install a driveway gate the same week I call?
In most cases, yes. We keep common LiftMaster, FAAC, BFT, and Linear parts on our trucks, and standard steel and aluminum gates are typically available within a few days here in the Henderson area. Custom gates take longer, usually two to four weeks depending on fabrication. Call (775) 210-7739 and we’ll give you a realistic timeline for your specific property.
Which driveway gate opener brands do you service?
We service and install LiftMaster, FAAC, BFT, and Linear openers, among others. Our technicians are factory-trained on each brand we carry, so the right diagnosis happens on the first visit. If your opener is another brand, call us anyway. We’ll tell you honestly whether we can service it or whether a replacement makes more sense for Henderson conditions.
Is it cheaper to repair or replace a driveway gate?
If the gate itself is structurally sound, repair is almost always cheaper. A post reset or hinge replacement costs a fraction of a new gate. Replacement makes sense when the gate is rusted through, badly damaged, or too small for your current needs. We’ll show you both options with real dollar figures and let you choose. Call (775) 210-7739 for a straight comparison on your gate.
If you’re considering a new driveway gate or need work on an existing one in Henderson, call (775) 210-7739. We’ll give you a clear answer, a written price, and a gate that works the way it should. For residents in nearby communities, you can also see our Gate Installation in Henderson page for more on what we do across the valley.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Henderson, serving Henderson.