Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Henderson?
Gate installation in Henderson, NV typically costs $1,850 to $6,400 for a standard residential driveway gate, including materials and labor. Most Henderson homeowners pay around $3,200 for a mid-range steel or aluminum gate with a basic opener. High-end custom iron gates with full automation run $8,000 to $15,000.
We install gates across Henderson every week, and those numbers hold true for the neighborhoods we work in most: Green Valley, Anthem, MacDonald Ranch, Inspirada, and McCullough Hills. The final number on your written estimate comes down to gate material, width, automation, and whether we’re replacing an existing gate or starting fresh with new posts.
Key takeaways:
- Standard driveway gates: $1,850 to $6,400
- Custom iron or steel gates: $8,000 to $15,000
- Pedestrian gates: $650 to $2,200
- Most installs finish in one day, including cleanup
- Written price before we touch anything, every time
Call (775) 210-7739 for a free estimate. A live person answers, any hour.
Gate Installation Cost Breakdown (2026)
Here’s what gate installation actually costs in Henderson right now. These are the numbers we quote on real estimates, not averages pulled from a national database. The gate installation work we do here reflects real Henderson material pricing and our local labor rates.
| Line Item | Typical Cost Range (Henderson, 2026) |
|---|---|
| Pedestrian gate (wood, steel, or vinyl, 4 ft) | $650 – $2,200 |
| Standard driveway gate (single swing, steel) | $1,850 – $3,800 |
| Standard driveway gate (double swing, steel) | $2,900 – $5,500 |
| Aluminum driveway gate (single swing) | $2,400 – $4,800 |
| Custom wrought iron gate (double swing) | $6,500 – $15,000 |
| Slide gate (single, steel) | $3,200 – $6,400 |
| Gate opener installation (LiftMaster, FAAC, BFT, others) | $850 – $2,400 |
| Gate post replacement (steel, set in concrete) | $400 – $950 per post |
| Old gate removal and haul-away | $150 – $400 |
| Permit processing and HOA compliance paperwork | $75 – $300 |
A few things move that number up or down. A wide double driveway in Anthem with an electric opener and keypad entry will land at the top of the range. A simple pedestrian gate along a side yard in Green Valley Ranch usually sits near the bottom. The material matters, too: aluminum resists the high-desert sun better than raw steel, and powder-coated steel holds up well against Henderson’s dry heat but costs more than galvanized steel.
We hand you a written price before work starts. That number includes the gate, hardware, posts, labor, and our cleanup routine. No line item appears on the invoice that wasn’t on that first written quote.
What Affects Gate Installation Pricing in Henderson
- Gate width and swing type. A 10-foot single swing gate needs less hardware than a 16-foot double swing. Wider gates also demand stronger posts and heavier hinge hardware. In Henderson subdivisions like Inspirada, we regularly see 14 to 16 foot double gates where the driveway serves an RV pad or a wider two-car garage.
- Material choice. Aluminum costs more upfront than steel but needs less maintenance in Henderson’s climate. Powder-coated steel runs mid-range. Wrought iron is the most expensive because of the fabrication work, and custom iron gates in MacDonald Highlands often push past $10,000 when they include ornamental scrollwork.
- Automation. A LiftMaster or FAAC opener adds $850 to $2,400 to the job. That includes the opener, safety sensors, wiring, and programming. We train on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we can match the opener to the gate’s weight and duty cycle without guessing.
- Post condition. If the existing posts are plumb and set deep in concrete, we can mount a new gate to them and save you real money. If the posts lean or the concrete footings are cracked (a common sight in Henderson where soil shifts with the heat and occasional rain), replacing them adds $400 to $950 per post. Latch & Post Gate Repair focuses on exactly those two things: the latch that holds the gate and the post that carries it.
- HOA requirements. Many Henderson communities, especially in Anthem, Inspirada, and Lake Las Vegas, have design review committees with specific gate standards. That can mean a particular metal finish, a maximum height, or a particular style. We handle the paperwork and permit processing as a standard part of the estimate, usually $75 to $300 depending on the HOA.
- Access and site conditions. A gate at the end of a long flag lot with limited walk-in access takes longer. Same story if we’re working on a slope, which happens often in McCullough Hills and Anthem’s higher elevations. Extra time shows up in the labor portion of the quote, and we explain that before we begin, so nothing surprises you.
How Much Does a Gate Opener Cost in Henderson?
A gate opener installation in Henderson runs $850 to $2,400, with the opener itself accounting for $400 to $1,400 of that. Labor, wiring, safety sensors, and programming make up the rest. Heavy-duty slide gate openers from brands like DoorKing and Linear sit at the top of that range, while lighter swing gate openers from LiftMaster and Ghost Controls land closer to $850 to $1,500.
Henderson’s heat isn’t hard on the opener components themselves, but it does affect the control board lifespan. We recommend openers with sealed housings and metal gears for Henderson’s fine dust, which gets into plastic gear assemblies and shortens their life. That’s a detail we seldom see quoted on other gate company websites, and it changes what we recommend depending on whether you’re off St. Rose Parkway or up near Horizon Ridge.
How to Save on Gate Installation
The biggest savings comes from working with what’s already solid. If your posts are straight and your concrete is sound, you pay for the gate and the hanging hardware, not demolition and new footings. We won’t tell you to replace posts that don’t need replacing. A straight, well-set post is the foundation of every gate, and we’d rather reuse a good one than charge you for a new one.
Second: choose the right material for how long you plan to stay. If this is a ten-year home, galvanized steel with powder coating does the job and saves money over aluminum. If this is your long-term place and you’d rather not think about rust or repainting, aluminum’s higher upfront cost pays off. We can show you samples of both in your driveway and give you the written difference before you choose.
Third: call for a free estimate. We don’t charge for a quote, and the price we quote is the price you’ll see on the final invoice. Call (775) 210-7739 and we’ll come out, take measurements, and hand you a written number. No pressure, no “today-only” pricing. Just a straight answer.
How the Installation Process Works (Step by Step)
Here’s exactly what happens when we install a gate at a Henderson home. This is the same routine we’ve followed since 2009, when Latch & Post Gate Repair began as part of the Cedarwell family of independently owned and operated gate specialists.
- Call and site visit. You call (775) 210-7739. A live person answers, any hour. We schedule a visit at a time that works for you, and a background-checked, uniformed technician shows up to measure the opening, check the posts, and talk through material and automation options.
- Written estimate. Before any work starts, you receive a written price. It covers the gate, hardware, opener if you want one, post work if needed, labor, and our cleanup routine. The number on that sheet is the number you’ll pay.
- Fabrication or material delivery. For standard steel and aluminum gates, we deliver and install within the same visit. For custom iron work, fabrication happens off-site and we schedule installation once the gate is ready.
- Removal of old gate. If you have an existing gate, we remove it and haul it away. We also check the posts at this stage. If they’re solid, we keep them. If they need replacement, we confirm that with you before we proceed.
- Installation. We hang the gate, set hardware, and if automation is included, mount the opener, run low-voltage wiring, and install safety sensors and any keypads or remotes. We train on your specific brand, checking every opener against the gate’s actual weight and swing arc.
- Cleanup and walkthrough. We lay drop cloths inside the home and wear shoe covers before stepping in. When the job is done, we take a photo of the cleanup and show it to you. Then we walk you through the gate’s operation, adjustments, and maintenance schedule. The 365-Day Done Right Promise covers the work: if it isn’t right, we make it right. No argument, no fine print.
Gate Installation vs. Gate Repair: Which Do You Need?
Here’s a useful rule of thumb. If your gate sags, drags, won’t latch, or the opener groans, you may only need a repair, and that usually costs less than a full installation. Common repairs in Henderson run $150 to $600 for hinge replacement, latch adjustment, wheel replacement, and track realignment. Opener repairs land between $200 and $900 depending on the board and gear condition.
But if the gate itself is bent, rusted through, or so misaligned that the frame is compromised, a new installation makes more financial sense. We’ll tell you which one we’d choose if it were our house. That’s not a sales line: Cody Beckman, owner at Latch & Post Gate Repair Henderson, has built this business on giving the same recommendation he’d make for his own gate. If repair saves you money and gets you three more years, we’ll say so.
What About HOA Approval in Henderson?
Many Henderson neighborhoods require advance approval before a new gate goes in. In Anthem, the design review board wants a drawing and material sample before installation. In Inspirada, some villages require specific colors and heights to match the streetscape. In Green Valley, rules vary by sub-association.
We include the paperwork in our written estimate, typically $75 to $300, depending on how much documentation your HOA needs. We’ve handled these filings for most major Henderson communities, and we know which offices move fast and which ones take a few weeks. You won’t have to manage that process alone.
FAQs – Gate Installation Cost
How much does a driveway gate cost in Henderson?
A standard single driveway gate in Henderson costs $1,850 to $3,800. A double driveway gate runs $2,900 to $5,500. Custom iron gates can reach $15,000 depending on size and ornamentation. These numbers include labor and standard hardware. Call (775) 210-7739 for a written quote specific to your driveway; estimates are free.
Is it cheaper to repair or replace a gate?
Repair almost always costs less, usually $150 to $600 for common fixes like hinges, latches, and wheels. Opener repair runs $200 to $900. Replacement makes sense when the gate frame is bent, rusted through, or the repair cost exceeds half the price of a new gate. We’ll give you both numbers in writing and let you decide.
How long does gate installation take?
Most standard gate installations in Henderson finish in one day, including removal of the old gate and cleanup. Custom iron fabrication adds one to three weeks for the off-site work. We’ll give you a firm timeline in the written estimate before you commit.
How much does a pedestrian gate cost in Henderson?
Pedestrian gates run $650 to $2,200 in Henderson, depending on material and hardware. A simple steel gate with a quality latch starts around $700. Adding a keypad lock or matching the finish to your driveway gate moves it toward the higher end.
Can you come today?
Call (775) 210-7739 and we’ll check the schedule. We answer calls 24/7 with a live person, not a voicemail tree. If we can’t get to your gate today, we’ll give you an honest time frame and hold to it.
Pricing reflects the Henderson market as of 2026. Latch and Post Gate Repair Henderson offers free estimates – call (775) 210-7739.
Written by Cody Beckman, Owner at Latch & Post Gate Repair Henderson, serving Henderson since 2009.
What Our Customers Say
"Installed a new gate motor and remotes. Respectful crew, protected the driveway, and cleaned up every bit of welding debris. Walked me through the new setup patiently."
- Nick Farrow"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Careful and considerate from start to finish. Our kids were playing in the yard and the crew was mindful of them the whole time. Gate opens like new and the area was spotless after."
- Marcus Teague